JVC RX-6008VBK, RX-6000VBK manual Appears on the display.SURROUND, Press Test to check the speaker

Page 26

4.Adjust the speaker output levels.

•To adjust the center speaker level, press CENTER –/+ (from –10 dB to +10 dB).

•To adjust the left rear speaker level, press REAR•L –/+ (from –10 dB to +10 dB).

•To adjust the right rear speaker level, press REAR•R –/+ (from –10 dB to +10 dB).

– CENTER +

5 6

– REAR•L +

8

9

MENU

– REAR•R +

JVC Theater Surround adjustments

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 12).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You cannot adjust the rear speaker output levels when you have set “REAR SPK” to “NONE.” See page 12.

•You cannot adjust the center speaker output level and center tone when you have set “CENTER SPK” to “NONE.” See page 12.

English

5. Press TEST again to stop the test

10 +10

ENTER

TEST

From the remote control:

1. Press SURROUND MODE repeatedly until “THEATER”

SURROUND

tone.

On the front panel:

1

appears on the display.SURROUND

MODE

• The Ù PRO LOGIC and DSP indicators also light up on the display.

2. Press SOUND.

SOUND

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

The 10 keys are activated for sound adjustments.

3. Press TEST to check the speaker

TEST

output balance.

1

1. Press SURROUND to active an appropriate Surround mode —

SURROUND

“TEST TONE L” starts flashing on the display, and a test tone comes out of the speakers in the following order:

PRO LOGIC, DOLBY DIGITAL or DTS SURROUND.

•Each time you press the button, the Surround mode turns on and off alternately.

•When “PRO LOGIC” is selected, the Ù PRO LOGIC indicator lights up on the display.

 

TEST TONE L

 

TEST TONE C

 

TEST TONE R

 

 

(Left front speaker)

 

(Center speaker)

 

(Right front speaker)

 

 

TEST TONE LS

 

TEST TONE RS

 

 

(Left rear speaker)

 

(Right rear speaker)

 

 

Notes:

2.Adjust the speaker output levels.

1)Press ADJUST repeatedly until one of the following indications appears on the display.

“CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

•Once you have pressed ADJUST, MULTI CURSOR %/ Þcan be also used for selecting the speaker.

2)Press MULTI CURSOR @/ # to adjust the selected speaker output level (from –10 dB to +10 dB).

3)Repeat 1) and 2) to adjust the other speaker output levels.

ADJUST

MULTI CURSOR

•You can adjust the speaker output levels without outputting the test tone.

•No test tone comes out of the center speaker when “CENTER SPK” is set to “NONE” (see page 12).

•No test tone comes out of the rear speakers when “REAR SPK” is set to “NONE” (see page 12).

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RX-6000VBK / RX-6008VBK Errata Sheet For U.S.A Table of Contents @ Û # Ü Front Panel Remote ControlParts Identification To use the Multi Cursor buttons w on the front panelChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure Connecting the rear and center speakersAnalog connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio component connectionsDBS tuner Video component connectionsDVD player If your audio components have an AV Compu Link terminalOn the back of the remote control, remove the battery cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletFrom the remote control To turn on the power, press PowerTo turn off the power into standby mode On the front panelSelecting the Front Speakers Muting the SoundAdjusting the Tone Adjusting the Subwoofer Output LevelAttenuating the Input Signal Reinforcing the BassSetting the Subwoofer Information Basic SettingsAdjusting the Front Speaker Output Balance Recording a Source Changing the Source NameCenter SPK Center Setting the Speakers for the DSP ModesRear Delay appears on Display Select the appropriate item aboutDynamic Range Compression Setting Crossover Frequency SettingLow Frequency Effect Attenuator Setting Select the low frequency effect Attenuator levelSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingSelect an appropriate setting Digital 2 terminal setting Digital 1 terminal settingAdjust the sound using the functions listed above Storing the Basic Settings Adjustments One Touch OperationUsing the Sleep Timer Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning Press FM/AM Select a preset channel stationPress 10 keys to select a preset Channel numberDAP modes Using the DSP Modes3D-PHONIC modes Dolby Surround Dolby Digital and Dolby Pro Logic Headphones modeSurround modes DTS Digital SurroundAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP Modes Headphones modeAdjusting the Surround Modes Press Test to check the speaker JVC Theater Surround adjustmentsAppears on the display.SURROUND PRO LOGIC, Dolby Digital or DTS SurroundPress Multi Cursor @/ #to select the effect level Lamp next to the button lights up Activating the DSP ModesPress Surround so that Select and play a sound sourceSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingOn the TV is RECEIVER/AMP AV Compu Link Remote Control SystemIf the AV Compu Link terminal If the AV Compu Link terminal on the TV is AV Compu Link EXOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTurntable Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD playerMD recorder CD player-changerCassette deck DVD playerTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionGeneral FM tuner IHFAM tuner 1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6000VBK, RX-6008VBK specifications

The JVC RX-6008VBK and RX-6000VBK are integral components of JVC's renowned line of receivers, designed to elevate home audio experiences with their impressive features and advanced technologies. These models cater to both casual listeners and audiophiles alike, offering a robust combination of performance and versatility.

One of the standout features of the RX-6008VBK and RX-6000VBK is their powerful amplification system. Both receivers deliver a significant output power, enabling them to drive speakers effectively and provide a rich, immersive sound experience. With 100 watts per channel, they can fill larger rooms with high-quality audio, bringing movies, music, and games to life.

These receivers are also equipped with multi-channel processing capabilities, allowing users to set up surround sound systems effortlessly. The RX-6008VBK and RX-6000VBK support various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy high-definition audio from their home theater systems.

Another notable characteristic is the incorporation of JVC's proprietary technologies. The receivers feature the Audyssey room correction technology, which calibrates the sound based on the acoustics of the room, ensuring optimal audio performance across different environments. This technology tailors the audio output to accommodate any room, delivering clear and balanced sound.

Connectivity is a significant aspect of the RX-6008VBK and RX-6000VBK. Both models provide an array of inputs, including HDMI, optical, and analog connections, making it easy to connect multiple devices such as gaming consoles, Blu-ray players, and streaming devices. The HDMI inputs support 4K Ultra HD passthrough, ensuring compatibility with the latest video formats, enabling users to enjoy stunning visual clarity.

Moreover, these receivers come with built-in Bluetooth capabilities, allowing users to stream audio directly from their smartphones or tablets. This wireless feature enhances convenience, offering an easy way to enjoy music without the hassle of cables.

In terms of design, the JVC RX-6008VBK and RX-6000VBK boast sleek and modern aesthetics, fitting seamlessly into any home decor. The user-friendly interface and remote control facilitate effortless navigation through various settings and playback options.

Ultimately, the JVC RX-6008VBK and RX-6000VBK are exceptional audio receivers, combining performance, advanced technologies, and user-friendly features. Whether for casual listening or an immersive home theater setup, these models stand out as reliable choices for enhancing any audio experience.
Top Page Image Contents