JVC RX-6008VBK, RX-6000VBK manual Selecting the Front Speakers, Muting the Sound

Page 12

Selecting different sources for picture and sound

You can watch picture from a video component while listening to sound from another component. Press one of the audio source selecting buttons (CD, TAPE/MD, PHONO, FM/AM, TV SOUND*), while viewing the picture from a video component such as the VCR or DVD player, etc.

On the front panel:

TV SOUND/DBS

SOURCE NAME

CD

TAPE/MD

PHONO

FM/AM

SOURCE NAME

From the remote control:

TV SOUND/DBS

CD TAPE/MD PHONO FM/AM

Selecting the Front Speakers

On the front panel ONLY:

When you have connected two pairs of the front speakers, you can select which to use. Pressing SPEAKERS 1 or SPEAKERS 2 activates the respective set of speakers.

•To use the speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS 1 to set it in the _ON position, and press SPEAKERS 2 to set it in the ÑOFF position.

•To use the speakers connected to the FRONT SPEAKERS 2 terminals, press SPEAKERS 2 to set it in the _ON position, and press SPEAKERS 1 to set it in the ÑOFF position.

•To use both sets of the speakers, press SPEAKERS 1 and SPEAKERS 2 to set them in the _ON position.

•To use neither set of the speakers, press SPEAKERS 1 and SPEAKERS 2 to set them in the ÑOFF position.

Note:

When only one set of the speakers is connected to either the FRONT SPEAKERS 1 or 2 terminals, do not activate both pairs of the speakers. If you do, no sound comes out of the front speakers.

English

Notes:

• Once you have selected a video source, pictures of the selected source are sent to the TV until you select another video source.

*Except when your TV is connected through the AV COMPU LINK remote control system (see page 27).

Adjusting the Volume

Listening only with headphones

1.Connect a pair of headphones to the PHONES jack on the front panel.

2.Press SPEAKERS 1 and SPEAKERS 2 to set them in the Ñ OFF position.

CAUTION:

On the front panel:

To increase the volume, turn MASTER

VOLUME clockwise.

To decrease the volume, turn it

counterclockwise.

•When you turn MASTER VOLUME rapidly, the volume level also changes rapidly.

•When you turn MASTER VOLUME slowly, the volume level also changes slowly.

From the remote control:

To increase the volume, press VOLUME +. To decrease the volume, press VOLUME –.

CAUTION:

MASTER VOLUME

–+

+

VOLUME

–

Be sure to turn down the volume before connecting or putting on the headphones, as high volume can damage both the headphones and your hearing.

Note:

You cannot shut off the sound through the other speakers using the SPEAKERS 1 and 2 buttons.

Muting the Sound

From the remote control ONLY:

Press MUTING to mute the sound through all MUTING speakers and headphones connected.

“MUTING” appears on the display and the

Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

Note:

The volume level can be adjusted within the range of “0” (minimum) to “80” (maximum).

volume turns off (the volume level indicator goes off).

To restore the sound, press MUTING again so that “OFF” appears on the display.

•Turning MASTER VOLUME or pressing VOLUME +/– also restores the sound.

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RX-6000VBK / RX-6008VBK Errata Sheet For U.S.A Table of Contents Front Panel Remote Control Parts Identification@ Û # Ü To use the Multi Cursor buttons w on the front panelBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerAnalog connections Audio component connectionsVideo component connections DVD playerDBS tuner If your audio components have an AV Compu Link terminalConnecting the Power Cord Putting Batteries in the Remote ControlOn the back of the remote control, remove the battery cover Plug the power cord into an AC outletTo turn on the power, press Power To turn off the power into standby modeFrom the remote control On the front panelSelecting the Front Speakers Muting the SoundAdjusting the Subwoofer Output Level Attenuating the Input SignalAdjusting the Tone Reinforcing the BassBasic Settings Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Recording a Source Changing the Source NameSetting the Speakers for the DSP Modes Rear Delay appears on DisplayCenter SPK Center Select the appropriate item aboutCrossover Frequency Setting Low Frequency Effect Attenuator SettingDynamic Range Compression Setting Select the low frequency effect Attenuator levelDigital Input Digital in Terminal Setting Select an appropriate settingSelecting the Analog or Digital Input Mode Digital 2 terminal setting Digital 1 terminal settingStoring the Basic Settings Adjustments One Touch Operation Using the Sleep TimerAdjust the sound using the functions listed above Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Select a preset channel station Press 10 keys to select a presetPress FM/AM Channel numberUsing the DSP Modes 3D-PHONIC modesDAP modes Headphones mode Surround modesDolby Surround Dolby Digital and Dolby Pro Logic DTS Digital SurroundAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP Modes Headphones modeAdjusting the Surround Modes JVC Theater Surround adjustments Appears on the display.SURROUNDPress Test to check the speaker PRO LOGIC, Dolby Digital or DTS SurroundPress Multi Cursor @/ #to select the effect level Activating the DSP Modes Press Surround so thatLamp next to the button lights up Select and play a sound sourceCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Synchronized RecordingAV Compu Link Remote Control System If the AV Compu Link terminalOn the TV is RECEIVER/AMP If the AV Compu Link terminal on the TV is AV Compu Link EXAutomatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Sound control section AmplifierTurntable CD playerCD player-changer Cassette deckMD recorder DVD playerTroubleshooting Problem Possible Cause SolutionSpecifications Per channel, min. RMS, driven into 8 ΩHz to 20 kHz with no more than 0.8% total Harmonic distortionFM tuner IHF AM tunerGeneral 781 954 650 Valley Road Wayne, NJ1099 Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6000VBK, RX-6008VBK specifications

The JVC RX-6008VBK and RX-6000VBK are integral components of JVC's renowned line of receivers, designed to elevate home audio experiences with their impressive features and advanced technologies. These models cater to both casual listeners and audiophiles alike, offering a robust combination of performance and versatility.

One of the standout features of the RX-6008VBK and RX-6000VBK is their powerful amplification system. Both receivers deliver a significant output power, enabling them to drive speakers effectively and provide a rich, immersive sound experience. With 100 watts per channel, they can fill larger rooms with high-quality audio, bringing movies, music, and games to life.

These receivers are also equipped with multi-channel processing capabilities, allowing users to set up surround sound systems effortlessly. The RX-6008VBK and RX-6000VBK support various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy high-definition audio from their home theater systems.

Another notable characteristic is the incorporation of JVC's proprietary technologies. The receivers feature the Audyssey room correction technology, which calibrates the sound based on the acoustics of the room, ensuring optimal audio performance across different environments. This technology tailors the audio output to accommodate any room, delivering clear and balanced sound.

Connectivity is a significant aspect of the RX-6008VBK and RX-6000VBK. Both models provide an array of inputs, including HDMI, optical, and analog connections, making it easy to connect multiple devices such as gaming consoles, Blu-ray players, and streaming devices. The HDMI inputs support 4K Ultra HD passthrough, ensuring compatibility with the latest video formats, enabling users to enjoy stunning visual clarity.

Moreover, these receivers come with built-in Bluetooth capabilities, allowing users to stream audio directly from their smartphones or tablets. This wireless feature enhances convenience, offering an easy way to enjoy music without the hassle of cables.

In terms of design, the JVC RX-6008VBK and RX-6000VBK boast sleek and modern aesthetics, fitting seamlessly into any home decor. The user-friendly interface and remote control facilitate effortless navigation through various settings and playback options.

Ultimately, the JVC RX-6008VBK and RX-6000VBK are exceptional audio receivers, combining performance, advanced technologies, and user-friendly features. Whether for casual listening or an immersive home theater setup, these models stand out as reliable choices for enhancing any audio experience.
Top Page Image Contents