JVC RX-6008VBK manual Getting Started, Before Installation, Connecting the FM and AM Antennas

Page 6

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

English

Before Installation

General

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

• Install the receiver in a location that is level and protected from

moisture.

• The temperature around the receiver must be between –5˚C and

35˚C (23˚F and 95˚F).

Connecting the FM and AM Antennas

FM Antenna Connections

A

ANTENNA

75

B

ANTENNA

75

 

FM

 

FM

 

COAXIAL

 

COAXIAL

 

 

AM

 

 

AM

 

 

LOOP

 

 

LOOP

 

AM

 

 

AM

 

 

EXT

 

 

EXT

 

• Make sure there is good ventilation around the receiver. Poor

ventilation could cause overheating and damage the receiver.

ANTENNA

FM Antenna

Extend the supplied FM antenna horizontally.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

Checking the Supplied Accessories

Check to be sure you have all of the following items, which are supplied with the receiver.

The number in the parentheses indicates the quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

If anything is missing, contact your dealer immediately.

FM 75

COAXIAL

AMOutdoor FM Antenna Cable

LOOP

AM

EXT

A. Using a Supplied FM Antenna

The FM antenna provided can be connected to the FM 75Ω COAXIAL terminal as temporary measure.

B. Using a Standard Type Connector (Not Supplied)

A standard type connector should be connected to the FM 75Ω COAXIAL terminal.

Note:

If reception is poor, connect an outdoor antenna.

Before attaching a 75Ω coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RX-6000VBK / RX-6008VBK Errata Sheet For U.S.A Table of Contents @ Û # Ü Front Panel Remote ControlParts Identification To use the Multi Cursor buttons w on the front panelChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure Connecting the rear and center speakersAnalog connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio component connectionsDBS tuner Video component connectionsDVD player If your audio components have an AV Compu Link terminalOn the back of the remote control, remove the battery cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletFrom the remote control To turn on the power, press PowerTo turn off the power into standby mode On the front panelSelecting the Front Speakers Muting the SoundAdjusting the Tone Adjusting the Subwoofer Output LevelAttenuating the Input Signal Reinforcing the BassSetting the Subwoofer Information Basic SettingsAdjusting the Front Speaker Output Balance Recording a Source Changing the Source NameCenter SPK Center Setting the Speakers for the DSP ModesRear Delay appears on Display Select the appropriate item aboutDynamic Range Compression Setting Crossover Frequency SettingLow Frequency Effect Attenuator Setting Select the low frequency effect Attenuator levelSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingSelect an appropriate setting Digital 2 terminal setting Digital 1 terminal settingStoring the Basic Settings Adjustments One Touch Operation Using the Sleep TimerAdjust the sound using the functions listed above Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Press FM/AM Select a preset channel stationPress 10 keys to select a preset Channel numberUsing the DSP Modes 3D-PHONIC modesDAP modes Dolby Surround Dolby Digital and Dolby Pro Logic Headphones modeSurround modes DTS Digital SurroundAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP Modes Headphones modeAdjusting the Surround Modes Press Test to check the speaker JVC Theater Surround adjustmentsAppears on the display.SURROUND PRO LOGIC, Dolby Digital or DTS SurroundPress Multi Cursor @/ #to select the effect level Lamp next to the button lights up Activating the DSP ModesPress Surround so that Select and play a sound sourceSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingOn the TV is RECEIVER/AMP AV Compu Link Remote Control SystemIf the AV Compu Link terminal If the AV Compu Link terminal on the TV is AV Compu Link EXOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTurntable Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD playerMD recorder CD player-changerCassette deck DVD playerTroubleshooting Problem Possible Cause SolutionHz to 20 kHz with no more than 0.8% total SpecificationsPer channel, min. RMS, driven into 8 Ω Harmonic distortionFM tuner IHF AM tunerGeneral 781 954 650 Valley Road Wayne, NJ1099 Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6000VBK, RX-6008VBK specifications

The JVC RX-6008VBK and RX-6000VBK are integral components of JVC's renowned line of receivers, designed to elevate home audio experiences with their impressive features and advanced technologies. These models cater to both casual listeners and audiophiles alike, offering a robust combination of performance and versatility.

One of the standout features of the RX-6008VBK and RX-6000VBK is their powerful amplification system. Both receivers deliver a significant output power, enabling them to drive speakers effectively and provide a rich, immersive sound experience. With 100 watts per channel, they can fill larger rooms with high-quality audio, bringing movies, music, and games to life.

These receivers are also equipped with multi-channel processing capabilities, allowing users to set up surround sound systems effortlessly. The RX-6008VBK and RX-6000VBK support various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy high-definition audio from their home theater systems.

Another notable characteristic is the incorporation of JVC's proprietary technologies. The receivers feature the Audyssey room correction technology, which calibrates the sound based on the acoustics of the room, ensuring optimal audio performance across different environments. This technology tailors the audio output to accommodate any room, delivering clear and balanced sound.

Connectivity is a significant aspect of the RX-6008VBK and RX-6000VBK. Both models provide an array of inputs, including HDMI, optical, and analog connections, making it easy to connect multiple devices such as gaming consoles, Blu-ray players, and streaming devices. The HDMI inputs support 4K Ultra HD passthrough, ensuring compatibility with the latest video formats, enabling users to enjoy stunning visual clarity.

Moreover, these receivers come with built-in Bluetooth capabilities, allowing users to stream audio directly from their smartphones or tablets. This wireless feature enhances convenience, offering an easy way to enjoy music without the hassle of cables.

In terms of design, the JVC RX-6008VBK and RX-6000VBK boast sleek and modern aesthetics, fitting seamlessly into any home decor. The user-friendly interface and remote control facilitate effortless navigation through various settings and playback options.

Ultimately, the JVC RX-6008VBK and RX-6000VBK are exceptional audio receivers, combining performance, advanced technologies, and user-friendly features. Whether for casual listening or an immersive home theater setup, these models stand out as reliable choices for enhancing any audio experience.
Top Page Image Contents