JVC RX-6000VBK manual Adjust the effect level, Press Multi Cursor @/ #to select the effect level

Page 27

English

4. Adjust the speaker output levels.

• To adjust the center speaker level, press

CENTER –/+ (from –10 dB to +10 dB).

• To adjust the left rear speaker level, press

REAR•L –/+ (from –10 dB to +10 dB).

• To adjust the right rear speaker level, press

– CENTER +

5 6

– REAR•L +

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

REAR•R –/+ (from –10 dB to +10 dB).

8

9

MENU

– REAR•R +

10 +10

ENTER

1.Press DSP MODE repeatedly until “THEATER” appears on the display.

•The ÙPRO LOGIC and DSP indicators also light up on the display.

2.Adjust the speaker output levels.

DSP MODE

ADJUST

5.

Press TEST again to stop the test tone.

TEST

1

 

 

6.

Press EFFECT to select an effect

EFFECT

 

level you want.

4

•Each time you press the button, the effect level changes as follows:

1)Press ADJUST repeatedly until one of the following indications appears on the display.

“CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

•Once you have pressed ADJUST, MULTI CURSOR % / Þ can be also used for selecting the speaker.

MULTI CURSOR

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

2)Press MULTI CURSOR @/ # to adjust the selected speaker output level (from –10 dB to +10 dB).

3)Repeat 1) and 2) to adjust the other speaker output levels.

4.Adjust the effect level.

1)Press ADJUST repeatedly until “DSP EFFECT” appears on the display.

•Once you have pressed ADJUST, MULTI CURSOR % / Þ also can be used for selecting “DSP EFFECT.”

•The display changes to show the current setting.

ADJUST

MULTI CURSOR

2) Press MULTI CURSOR @/ #to select the effect level.

• As you press it, the effect level changes as follows:

DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

24

Page 26 Page 28
Image 27
Page 26 Page 28
Contents RX-6000VBK / RX-6008VBK Errata Sheet For U.S.A Table of Contents To use the Multi Cursor buttons w on the front panel Front Panel Remote ControlParts Identification @ Û # ÜGetting Started Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesConnecting the rear and center speakers Connecting the SpeakersBasic connecting procedure Connecting the front speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog connectionsIf your audio components have an AV Compu Link terminal Video component connectionsDVD player DBS tunerPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control On the back of the remote control, remove the battery coverOn the front panel To turn on the power, press PowerTo turn off the power into standby mode From the remote controlMuting the Sound Selecting the Front SpeakersReinforcing the Bass Adjusting the Subwoofer Output LevelAttenuating the Input Signal Adjusting the ToneRecording a Source Changing the Source Name Basic SettingsAdjusting the Front Speaker Output Balance Setting the Subwoofer InformationSelect the appropriate item about Setting the Speakers for the DSP ModesRear Delay appears on Display Center SPK CenterSelect the low frequency effect Attenuator level Crossover Frequency SettingLow Frequency Effect Attenuator Setting Dynamic Range Compression SettingDigital 2 terminal setting Digital 1 terminal setting Digital Input Digital in Terminal SettingSelect an appropriate setting Selecting the Analog or Digital Input ModeStoring the Basic Settings Adjustments One Touch Operation Using the Sleep TimerAdjust the sound using the functions listed above Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Channel number Select a preset channel stationPress 10 keys to select a preset Press FM/AMUsing the DSP Modes 3D-PHONIC modesDAP modes DTS Digital Surround Headphones modeSurround modes Dolby Surround Dolby Digital and Dolby Pro LogicFront Available DSP Modes According to the Speaker ArrangementAdjusting the DAP Modes Headphones mode Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes PRO LOGIC, Dolby Digital or DTS Surround JVC Theater Surround adjustmentsAppears on the display.SURROUND Press Test to check the speakerPress Multi Cursor @/ #to select the effect level Select and play a sound source Activating the DSP ModesPress Surround so that Lamp next to the button lights upSynchronized Recording Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Same timeIf the AV Compu Link terminal on the TV is AV Compu Link EX AV Compu Link Remote Control SystemIf the AV Compu Link terminal On the TV is RECEIVER/AMPOne-Touch DVD Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayCD player Operating JVC’s Audio/Video ComponentsSound control section Amplifier TurntableDVD player CD player-changerCassette deck MD recorderProblem Possible Cause Solution TroubleshootingHarmonic distortion SpecificationsPer channel, min. RMS, driven into 8 Ω Hz to 20 kHz with no more than 0.8% totalFM tuner IHF AM tunerGeneral 781 954 650 Valley Road Wayne, NJ1099 Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-6000VBK, RX-6008VBK specifications

The JVC RX-6008VBK and RX-6000VBK are integral components of JVC's renowned line of receivers, designed to elevate home audio experiences with their impressive features and advanced technologies. These models cater to both casual listeners and audiophiles alike, offering a robust combination of performance and versatility.

One of the standout features of the RX-6008VBK and RX-6000VBK is their powerful amplification system. Both receivers deliver a significant output power, enabling them to drive speakers effectively and provide a rich, immersive sound experience. With 100 watts per channel, they can fill larger rooms with high-quality audio, bringing movies, music, and games to life.

These receivers are also equipped with multi-channel processing capabilities, allowing users to set up surround sound systems effortlessly. The RX-6008VBK and RX-6000VBK support various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy high-definition audio from their home theater systems.

Another notable characteristic is the incorporation of JVC's proprietary technologies. The receivers feature the Audyssey room correction technology, which calibrates the sound based on the acoustics of the room, ensuring optimal audio performance across different environments. This technology tailors the audio output to accommodate any room, delivering clear and balanced sound.

Connectivity is a significant aspect of the RX-6008VBK and RX-6000VBK. Both models provide an array of inputs, including HDMI, optical, and analog connections, making it easy to connect multiple devices such as gaming consoles, Blu-ray players, and streaming devices. The HDMI inputs support 4K Ultra HD passthrough, ensuring compatibility with the latest video formats, enabling users to enjoy stunning visual clarity.

Moreover, these receivers come with built-in Bluetooth capabilities, allowing users to stream audio directly from their smartphones or tablets. This wireless feature enhances convenience, offering an easy way to enjoy music without the hassle of cables.

In terms of design, the JVC RX-6008VBK and RX-6000VBK boast sleek and modern aesthetics, fitting seamlessly into any home decor. The user-friendly interface and remote control facilitate effortless navigation through various settings and playback options.

Ultimately, the JVC RX-6008VBK and RX-6000VBK are exceptional audio receivers, combining performance, advanced technologies, and user-friendly features. Whether for casual listening or an immersive home theater setup, these models stand out as reliable choices for enhancing any audio experience.
Top Page Image Contents