Adjusting the tone (bass and treble)
9. Enter the tone mode.
ENGLISH
• The tone mode is displayed for several seconds.
10. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired tone mode.
•Each time these buttons are pressed, the tone mode is selected as follows :
OFF : To listen to a program source without the tone effect. ("DIR" indicator lights up.)
ON : To adjust the tone for your taste. ("DIR" indicator goes off.)
■When the TONE is set to ON to adjust the tone (bass and treble).
11. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone.
•Each time these buttons are pressed, the tone is selected as follows :
→BASS ↔ TRBL (treble) ↔ TONE ON ←
12. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the selected tone as desired.
•The tone level can be adjusted within the range of
•In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).
•Extreme settings at high volume may damage your speakers.
•To complete tone adjustment, repeat the above steps 11 and 12.
•If the tone display disappears, start from the step 9 again.
16
