1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the ENTER button.
Example) When selecting the CD
2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
When selecting the DIGITAL IN
•You should assign the connected DIGITAL INs to the desired of CD and VIDEO 1 ~ VIDEO 2. (For details, refer to "CONNECTING DIGITAL INs" on page 7.)
•You can select the desired of OPT (optical), COX 1(coaxial 1), COX 2(coaxial 2) and ANL (analog).
■Note :
•In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital audio signals can be heard from the same DIGITAL IN.
When selecting the AUTO SURROUND
• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.
OFF | : You can select the desired of different surround modes selectable for the signal being input with |
(Manual surround mode) | using the MULTI CONTROL knob or the SURROUND MODE UP/DOWN (>/<) buttons. |
↕ | (For details, refer to "ENJOYING SURROUND SOUND" on page 18.) |
ON | : The optimum surround mode will be automatically selected depending on the signal format being |
(Auto surround mode) | input. |
■Notes : |
|
•When the input source other than CD and VIDEO 1 ~ 2 is selected, you cannot select the auto surround mode and can select the surround mode as desired(the manual surround mode).
•When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.
ENGLISH
37
