Listening in Virtual Surround Headphone mode
•The Virtual Surround Headphone mode simulates 5.1 channel surround, which allows you to enjoy 5.1 channel surround sound through 2 channel hedphones, just like listening from 5.1 channel speakers.
■Notes :
•Only when the SPEAKER button is set to off, the Virtual Surround Headphone mode can be selected.
•When listening to music files from the USB mass storage device, the Virtual Speaker Headphone mode cannot be selected.
•Select the Virtual Surround Headphone mode.
• Then "VS HP" is displayed and the Virtual Surround Headphone mode is selected.
• To cancel the Virtual Surround Headphone mode, press the STEREO button.
When adjusting the sound parameters
•While playing digital signals from Dolby Digital or DTS program source or listening in Dolby Pro Logic II Music mode, you can adjust their parameters for optimum surround effect.
1. Press the SOUND PARAMETER button.
• Then "DRC : ~ " (or "PANO : ~ ") is displayed for several seconds.
• If the parameter mode disappears, press this button again.
ENGLISH
2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter.
• Each time these buttons are pressed, the parameter mode changes as follows:
→ "DRC" ↔ "PANO" ↔ "C.WIDTH" ↔ "DIMEN" ←
(Dynamic Range Compression) (Panorama mode) (Center width control) (Dimension control)
• "DRC" can be selected only while playing digital signals from Dolby Digital or DTS source.
• "PANO", "C.WIDTH" and "DIMEN" can be selected only while listening in Dolby Pro Logic II Music mode.
3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired.
■When selecting the "DRC (Dynamic Range Compression :
Night mode)"
This function compresses the dynamic range of previously specified parts of Dolby Digital or DTS sound track (with extremely high volume) to minimize the difference in volume between the specified and
■Note :
•In some Dolby Digital or DTS softwares, the night mode may not be valid.
19
