Huffy UXT3036AA, UXT4030AA, UXT4036AA, UXT2030AA Mark pole sections with tape not supplied as shown

2.Mark pole sections with tape (not supplied) as shown.

5

Tape (Not Supplied)

4

6

3.While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the taped reference mark on the middle pole. Upright assembly.

IMPORTANT!:

Center alignment slot of middle pole section (5) in a lower hole of top pole section

(4) as shown.

NOTE:

POLE SECTIONS

SHOULD HAVE A

3-1/2" (9 CM) MINIMUM

OVERLAP.

WOOD SCRAP

(NOT SUPPLIED)

5

4

13 03/04 P/N 21463607