Image 831.1597 user manual

Page 13

(37) with two M6 x 16mm Screws (3).

Tilt the Seat Support Tube (37) upwards and attach the narrow end of the Seat (14) to the Seat Support

Tube with an M6 x 38ram Bolt (60) and an M637 Washer (30).

24.Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTING THE WEIGHT BENCH starting on the following page.

. °

Image 13

Contents Model No Serial No Full90-DayWarranty Page Backrest Left Side\\\\\\\\\\\\\\\\ One 1 standard screwdriver Nylon Loeknuts yet AllPage Page Locknut yet Shown. The indicated holes are not centered Make sure that the Backrest Tubes are turned asBackrest Tubes but are closer to one side Turn the Backrest Tubes so the holes are closerNylon Leeknut the Seat Adjustment Bracket must pivot easily Page AnACHINGWEIGHTS to the Barbell Using the Locking BAR and Safety SpottersHandle Crossbar KeyNo Qty Description Upright3250o 4246 Model No QUESTIONS?