• r | _" | u |
Before beginning assembly, carefully read the following Information and Instructions:
IDENTIFICATION CHART on page 5.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
In addition to the included allen wren_ch ,
assembly requires the following tools (not included):
•Two (2) adjustable wrenches
•One (1) rubber mallet
•Assembly requires two people.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing matedals until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•For help identifying small parts, use the PART
•One (1) standard screwdriver
•One (1) phillips screwdriver
•Lubricant, such as grease or petroleum jelly, and soapy water.
Assembly will be more convenient if you have the following tools: A socket set, a set of
1.
2.
Before beginning, make sure that you understand the information in the box above. Note: Some
parts described in the assembly steps may be
Press a 50mm Square Outer Cap (17) onto each end of a Base (7). Turn the Base so the large hole is in the.position shown. Insert two M8 x 65mm Carriage Bolts (59) and two M10 x 65mm Carriage Bolts (40) up into the indicated holes in the Base. Place the Base flat on the floor,
Turn the Base Crossbar (20) so the waming decal is positioned as shown. Attach the Base (7) to the Base Crossbar with two M8 x 70mm Bolts (41); a Large Support Plate (12), and two M8 Nylon Locknuts (54). Do not tighten the Nylon Locknuts yet.
Press a 50mm Square Outer Cap (17) onto each end of the other Base (7). Turn the Base so the large hole is in the position shown. Insert two M8 x 65mm
Carriage Bolts (59) and two MIO x 65mm Carriage Bolts (40) up into the indicated holes in the Base. Place the Base flat on the floor.
Attach the Base (7) to the Base Crossbar (20) with two M8 x 70mm Bolts (41), a Large Support Plate (12), and two M8 Nylon Locknuts (54). Do not tighten the Nylon Locknuts yet.
Decal 54
/ 17
12
Large Hole
17 |
| 7 | 59 | 41 |
|
| |||
|
|
|
| |
| 4O |
|
|
|
2 |
|
|
| 17 |
| 41 |
| 12 | |
|
|
| ||
|
|
|
| |
|
|
|
| 54 |
Large | Hole |
|
|
|
17 |
|
| 59 | 54 |
|
|
|
| |
|
|
|
| 2O |
| 4O |
|
|
|
6 | ": |