Training and Operating Instructions
Quick Start (For Familiarising)
Quick Start:
Without Particular Settings
• Press “QUICKSTART”.
Last user is displayed or
Select person
“MANUAL” programme is started. The training time counts upwards.
• Pedal
Cadence, speed, distance and energy consumption count upwards. Pulse, if a pulse measurement is active.
The current bar changes every 15 seconds.
Changing Load
• “Encoder right”
Load is increased in single steps.
• “Encoder left”
Load is decreased in single steps.
Interruption to Training
• Press “START STOP”
The average value (Ø) of the load is briefly displayed. Cadence and speed display “0 values”
The training time TIME and STOP are displayed as flas- hing.
Continuing Training
• Press “START STOP”
• Pedal
or
End of Training and Standby Mode
The display switches to standby mode with temperature display 4 minutes after training has ended.
It is possible to continue the last training session if the dis- play is reactivated by pressing a button or pedalling.
18 GB