GB Assembly Instructions
Instructions for Assembly
■Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
■Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the dia- grams. The correct sequence is given in capital letters.
■Please note that there is always a danger of injury when wor- king with tools or doing manual work. Therefore please be ca- reful when assembling this machine.
■Ensure that your working area is free of possible sources of dan- ger, for example don’t leave any tools lying around. Always dis- pose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
■The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if pos- sible technically talented.
■The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as in- structed. The required tools are supplied with the equipment.
■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand un- til resistance is felt, then use spanner to finally tighten nuts com- pletely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.
■For technical reasons, we reserve the right to carry out prelimi- nary assembly work (e.g. addition of tubing plugs).
■For machines with rope systems: please ensure that all ropes are fixed correctly. This is especially important for latissimus bars.
List of spare parts page 42-44
When ordering spare parts, always state the full article number,
Example order: Art. no.
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in- ternal) packaging, which is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life plea- se dispose of this article correctly and safely (local refuse sites).
GB KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcestershi- re B98 9HL · Great Britain
http://www.kettler.co.uk
USA KETTLER International Inc.
1355 London Bridge Road · VA 23450 Virginia Beach
USA
http://www.kettlerusa.com
5