Ordering Information, Evaluation Kits | Agilent Technologies 5203

Transceiver Reliability

and Performance

Qualification Data

The 1 x 9 transceivers have passed Agilent reliability and performance qualification testing and are undergoing ongoing quality monitoring. Details are available from your Agilent sales representative.

These transceivers are manufactured at the Agilent Singapore location which is an ISO 9002 certified facility.

Ordering Information

The HFBR-5204/-5204T and HFBR-5205/-5205T 1300 nm products and the HFBR-5203/ -5203T 800 transceivers are available for production orders through the Agilent Component Field Sales Offices and Authorized Distributors world wide.

Applications Support

Materials

Contact your local Agilent Component Field Sales Office for information on how to obtain PCB Layouts, Test Boards and demo boards for the 1x9 transceivers.

Evaluation Kits

Agilent has available three evaluation kits for the 1x9 transceivers. The purpose of these kits is to provide the necessary materials to evaluate the perform- ance of the HFBR-520X family in a pre-existing 1x13 or 2x11 pinout system design configura- tion or when connectored to various test equipment.

1.HFBR-0305 – ATM Evaluation Kit:

This kit consists of one HFBR- 5205, one 1 x 13 to 1 x 9 pin

out adapter card, and one three meter duplex SC to duplex ST connectored 62.5/125 μm fiber optic cable.

2.HFBR-0303 – FDDI Evaluation Kit:

This kit consists of one HFBR- 5103, one 2 x 11 to 1 x 9 pin out adapter card, one 1 x 13 to 1 x 9 pin out adapter card, and one three meter duplex SC to MIC/

Receptacle connectored 62.5/ 125 μm fiber optic cable.

3.HFBR-0319 – Evaluation Test Fixture Board:

This test fixture converts +5 V ECL 1x9 transceivers to –5 V ECL BNC Coax Connections so that direct connections to industry standard fiber optic test equipment can be accomplished.

Accessory Duplex SC

Connectored Cable Assemblies Agilent recommends for optimal coupling the use of flexible-body duplex SC connectored cable.