
13
Agilent offers two such compatible Duplex SC connec- tored jumper cable assemblies to assist you in the evaluation of these transceiver products. These cables may be purchased from Agilent with the following part numbers.
1.
A duplex cable 1 meter long assembled with 62.5/125 μm fiber and Duplex SC connector plugs on both ends.
2.
A duplex cable 10 meters long assembled with 62.5/125 μm fiber and Duplex SC connector plugs on both ends.
Accessory Duplex ST
Connectored Cable Assemblies Agilent recommends the use of Duplex
Parameter | Symbol | Min. | Typ. | Max. | Unit | Reference |
|
|
|
|
|
|
|
Supply Current | ICC |
| 145 | 185 | mA | Note 3 |
Power Dissipation | PDISS |
| 0.76 | 0.97 | W |
|
Data Input Current - Low | IIL | 0 |
| μA |
| |
Data Input Current - High | IIH |
| 14 | 350 | μA |
|
Parameter | Symbol | Min. | Typ. | Max. | Unit | Reference |
|
|
|
|
|
|
|
Supply Current | ICC |
| 82 | 145 | mA | Note 4 |
Power Dissipation | PDISS |
| 0.3 | 0.5 | W | Note 5 |
Data Output Voltage - Low | VOL - VCC |
| V | Note 6 | ||
Data Output Voltage - High | VOH - VCC |
| V | Note 6 | ||
Data Output Rise Time | tr | 0.35 |
| 2.2 | ns | Note 7 |
Data Output Fall Time | tf | 0.35 |
| 2.2 | ns | Note 7 |
Signal Detect Output Voltage - Low | VOL - VCC |
| V | Note 6 | ||
Signal Detect Output Voltage - High | VOH - VCC |
| V | Note 6 | ||
Signal Detect Output Rise Time | tr | 0.35 |
| 2.2 | ns | Note 7 |
Signal Detect Output Fall Time | tf | 0.35 |
| 2.2 | ns | Note 7 |