CAUTION: Make all connections before plugging the unit into an AC power outlet.
Connecting the Speakers (Refer to instructions for speakers as well.)
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the
1.Open the terminals and insert the speaker wires firmly (be sure to remove the insulation at the ends of each wire first), then close the terminals.
2.Connect the red (+) and black
Connect the red (+) and black
Right speaker
Main Unit
SPEAKERS
RIGHT LEFT
Left speaker
IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on the back panel.
CAUTION: If a TV is installed near the speakers, the picture on the TV may be distorted. If this happens, place the speakers away from the TV.
Connecting an External Component
You can connect another component to the AUX jacks, and reproduce the sound of the component through the
To the audio output jacks
AUX
VCR (or another component) | LEFT |
RIGHT
Note: When you connect a VCR to the
5