JVC CA-MD9R manual Selecting a Passage within a Track on the unit only, Press the MD button

Page 31

Selecting a Track —————————————————————————

Using the unit

Rotate the MULTI JOG dial while playing or pausing.

Rotate the MULTI JOG dial clockwise to select the next tracks.

Rotate the MULTI JOG dial counterclockwise to select the previous tracks.

If you rotate the MULTI JOG dial over the last track of the selected MD, the unit jumps to the first track of the next MD.

MULTI JOG

Using the Remote Control

Press the 4or ¢button while playing or pausing.

Each time you press the 4 or ¢ button, the track changes by one.

• Press the ¢ button to go ahead one track at a time.

• Press the 4 button to go back one track at a time.

Holding down the 4 or ¢ button allows you to change tracks continuously.

Selecting a Passage within a Track (on the unit only) ——————————

Press and hold the

or

button while playing or pausing.

• Hold the button to fast forward the track, and release the button when you reach the passage you want to hear.

Hold the button to reverse the track, and release the button when you reach the passage

you want to hear.

MD

Locating a Track with the Remote Control Directly ————————————

Using the number buttons on the Remote Control allows you to go directly to the beginning of any track.

DISC 1 DISC 2 DISC 3 1.

2.

 

PTY

DISPLAY

EON ON/OFF

SEARCH

MODE

1

2

3

 

TA/NEWS/

PTY SELECT

 

3.

INFO

 

4

5

6

7 8 9

10 +10

Press the MD button.

The Remote Control is set to the MD operation mode.

Press the DISC button (1 to 3) for the MD containing the track you want to listen to.

Example: For the third MD, press DISC 3.

Enter the number of the track you want to listen to with the number buttons.

The selected track starts playing.

Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For track 32, press +10 three times, then 2.

Programing the Playing Order of the Tracks

You can change the order in which the MDs and tracks play. (Program Play)

You can program up to 32 steps in any desired order from among the loaded MDs.

You can only make or change a program when the MD Recorder is stopped.

Using the unit

PLAY MODE 1. Press the PLAY MODE button repeatedly on the MD Recorder until the PROGRAM indicator lights up on the display.

“MD PROGRAM” also appears on the display.

If you have already made a program, the last step of the previous program is displayed instead of “MD PROGRAM” unless you have erased the program.

3

3

CD

MD

2

2

1

1

PROGRAM

MD

CD

Each time you press the PLAY MODE button, MD play mode changes as follows:

=MD PROGRAM =MD RANDOM = Off (Continuous Play) = (back to the beginning)

28

Image 31 Contents
CA-MD9R If in Doubt Consult a Competent Electrician Class Laser Product How This Manual Is Organized FeaturesTable of Contents Getting Started AccessoriesHow to Put Batteries in the Remote Control Using the Remote ControlUsing the Coaxial Type Connector Not Supplied Connecting the FM AntennaConnecting the AM MW/LW Antenna Using the Supplied FM AntennaTo the audio output jacks Connecting an External ComponentTo stop the Demo, press any button Demo ModeOn the Remote Control One Touch OperationPress Button Using the AmplifierTurning the Power On and Off Multi JOG dialFor private listening Adjusting the VolumeReinforcing the Bass Sound Muting FunctionA. effect modes Selecting a Sound ModeSound Modes Live surround modesListening to an External Component Using an External ComponentCreating Your Own Customized Sound Mode Press the AUX button on the unit or on the Remote ControlTuning in a Station Using the TunerPress the Tuner button on the unit Using the unit Presetting StationsSelecting a Radio Station Receiving FM Stations with RDS Changing the FM Reception ModeWhat Information RDS Can Provide R. M Description of the PTY codesSearching for Programs by PTY Codes PTY Search Changing the RDS InformationYou have selected EON FunctionPress the EON ON/OFF button News NewsTest Function Alarm FunctionCD indicators on the unit Using the CD PlayerCD indicators on the display Place a CD, with its label side up, onto the tray Using the CD PlayerPower comes on, and operations are done automatically Loading CDsChanging CDs while Playing Playing CDsPlaying order of CDs Selecting a Passage within a Track on the unit only Locating a Track with the Remote Control DirectlyPrograming the Playing Order of the Tracks Selecting a TrackRotate the Multi JOG dial to select a track CD 2. Press the CD button on the Remote ControlPress one of the CD buttons 1 to 3 to select a CD Track Step NumberPress the number buttons to select the tracks Checking the ProgramChanging the Program Press one of the Disc buttons 1 to Press the CD Repeat button on the unit Indicator appears on the display Random Play Repeating a Selection or CDsStop Ü / 8 Play/Pause Using the MD Recorder PlayingMD indicator on the unit MD indicators on the displayPress the 0button to close the loading slot cover Using the MD RecorderLoading MDs Press the 0button to the right of the MD loading slotsPress the 0 button Playing MDsChanging MDs While Playing Playing order of MDsPress the MD button Selecting a Passage within a Track on the unit onlyTrack Step Number number Press one of the MD buttons 1 to 3 to select an MDTo stop playing, press the 7button MD Track Step number number numberRepeating a Selection or MDs Listening Erasure prevention tab Recording/Editing About the track marksThings to Know Before You Start Recording To avoid erasing important recordingsTo stop recording, press the 7 button Changing the Display ModeStandard Recording Press the Ü/ 8button to start the recordingLong Recording Long REC Prepare CDs and a recordable MD into the MD1 loading slot One Touch CD Recording CD RECPress the CD REC button on the MD Recorder Three CD Recording Triple REC DISPLAYChanging the Display ModePrepare CDs and recordable MDs Repeat to program other tracks Listening Edit Recording ListeningPress the Listening button To skip the current track, press the Skip buttonTo stop recording, press the 7button Replace the CDs on the trays not selected First Track Recording 1ST Track RECPrepare CDs, and a recordable MD into the MD1 loading slot Press the 1ST Track REC buttonUsing the MD Recorder Editing Press the Ü/ 8button Divide FunctionPress the 0 button to eject the MD Shifted positionPress the Edit button Total track number increasesPress the 0button to eject the MD Join FunctionTwo adjacent tracks selected Total track number decreasesMove Function Ex. When you want to move the trackEdit Erase Function Ex. When you want to erase trackTrack number to be erased Erase the middle portion ALL Erase FunctionErasing a Portion of a Track All track numbers disappearRepeat steps 5 to 7 to enter up to 32 characters Letters and symbolsTitle Function Giving a Title to an MDFollow steps 4 to 10 Giving a Title to a TrackChanging the Title Selected track number appearsTape Direction Indicator on the unit Using the Cassette Deck PlayingOne Touch Play Regular PlayFast Left and Fast Right Finding the Beginning of the Next Selection Other Useful Features of the Cassette DeckMusic Scan Finding the Beginning of the Current SelectionÜPlay Stop Using the Cassette Deck RecordingPosition 1 the normal mode to position Press the CD REC button CD Direct RecordingPrepare CDs. See Insert a blank or erasable cassette in the cassette holderSetting the Clock Using the TimersMinute digits starts flashing on the display Set the time you want the unit to turn on Setting the Daily TimerSet the time you want the unit to turn off Select the source you want to listen to Set the Volume LevelDisplay To change the Daily Timer setting Turning the Daily Timer On and OffBefore Turning Off the unit Set the time you want the unit to be turned on Setting the Recording TimerProcedure for Setting the Recording Timer On the displayTo change the recording timer setting Turning the Recording Timer On and OffSET4. Select a preset station you want to record Press to turn the power off if necessaryTo cancel the Sleep Timer setting Setting the Sleep TimerProcedure for Setting the Sleep Timer To change the Sleep Timer settingTimer Priority Press Disc Lock FunctionLocking the Discs Unlocking the DiscsCare and Maintenance Symptom TroubleshootingPossible Cause Action MD Error Messages Specifications Atrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsAdditional Informations Some Words about MDsSerial Copy Management System Scms Normally When vibratedSound Skip Guard Memory JVC 0398TTMMDWSAN