JVC CA-MD9R manual Programing the Playing Order of the Tracks, Selecting a Track

Page 24

Selecting a Track —————————————————————————

Using the unit

Rotate the MULTI JOG dial while playing or pausing.

•Rotate the MULTI JOG dial clockwise to select the next tracks.

•Rotate the MULTI JOG dial counterclockwise to select the previous tracks.

❏If you rotate the MULTI JOG dial over the last track of the selected CD, the unit jumps to the first track of the next CD.

MULTI JOG

Using the Remote Control

Press the 4or ¢button while playing or pausing.

❏ Each time you press the 4 or ¢button, the track changes by one.

• Press the ¢ button to go ahead one track at a time.

• Press the 4 button to go back one track at a time.

❏ Holding down the 4 or ¢ button allows you to change tracks continuously.

Selecting a Passage within a Track (on the unit only) ——————————

Press and hold the

or

button while playing or pausing.

•Hold the button to fast forward the track, and release the button when you reach the

passage you want to hear.

•Hold the button to reverse the track, and release the button when you reach the passage you want to hear.

Locating a Track with the Remote Control Directly ————————————

 

 

CD

Using the number buttons on the Remote Control allows you to go directly to the beginning of any

 

 

 

 

 

 

track.

 

 

 

1. Press the CD button.

 

 

 

The Remote Control is set to the CD operation mode.

DISC 1 DISC 2

DISC 3 2. Press the DISC button (1 to 3) for the CD containing the track you want to listen to.

 

 

 

❏ Example: For the third CD, press DISC 3.

1

PTY

DISPLAY

3. Enter the number of the track you want to listen to with the number buttons.

2

3

EON ON/OFF

SEARCH

MODE

 

TA/NEWS/

5

6

The selected track starts playing.

4

INFO

PTY SELECT

 

7

8

9

❏ Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then

10

+10

 

10. For track 32, press +10 three times, then 2.

 

 

Programing the Playing Order of the Tracks

You can change the order in which the CDs and tracks play. (Program Play)

❏You can program up to 32 steps in any order from among the loaded CDs.

❏You can only make or change a program when the CD Player is stopped.

Using the unit

CD PLAY MODE

1. Press the CD PLAY MODE button repeatedly on the CD Player until the PROGRAM indicator

 

 

lights up on the display.

“CD PROGRAM” also appears on the display.

❏If you have already made a program, the last step of the previous program is displayed instead of “CD PROGRAM” unless you have erased the program.

3

3

CD

MD

2

2

1

1

PROGRAM

CD

❏Each time you press the CD PLAY MODE button, CD play mode changes as follows:

=CD PROGRAM =CD RANDOM = Off (Continuous Play) = (back to the beginning)

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents CA-MD9R If in Doubt Consult a Competent Electrician Class Laser Product Features How This Manual Is OrganizedTable of Contents Accessories How to Put Batteries in the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Connecting the AM MW/LW AntennaUsing the Supplied FM Antenna Using the Coaxial Type Connector Not SuppliedConnecting an External Component To the audio output jacksDemo Mode On the Remote ControlOne Touch Operation To stop the Demo, press any buttonUsing the Amplifier Turning the Power On and OffMulti JOG dial Press ButtonAdjusting the Volume Reinforcing the Bass SoundMuting Function For private listeningSelecting a Sound Mode Sound ModesLive surround modes A. effect modesUsing an External Component Creating Your Own Customized Sound ModePress the AUX button on the unit or on the Remote Control Listening to an External ComponentUsing the Tuner Tuning in a StationPress the Tuner button on the unit Presetting Stations Using the unitSelecting a Radio Station Changing the FM Reception Mode Receiving FM Stations with RDSWhat Information RDS Can Provide Description of the PTY codes R. MChanging the RDS Information Searching for Programs by PTY Codes PTY SearchEON Function Press the EON ON/OFF buttonNews News You have selectedAlarm Function Test FunctionUsing the CD Player CD indicators on the unitCD indicators on the display Using the CD Player Power comes on, and operations are done automaticallyLoading CDs Place a CD, with its label side up, onto the trayPlaying CDs Changing CDs while PlayingPlaying order of CDs Locating a Track with the Remote Control Directly Programing the Playing Order of the TracksSelecting a Track Selecting a Passage within a Track on the unit onlyCD 2. Press the CD button on the Remote Control Press one of the CD buttons 1 to 3 to select a CDTrack Step Number Rotate the Multi JOG dial to select a trackChecking the Program Changing the ProgramPress one of the Disc buttons 1 to Press the number buttons to select the tracksIndicator appears on the display Random PlayRepeating a Selection or CDs Press the CD Repeat button on the unitUsing the MD Recorder Playing MD indicator on the unitMD indicators on the display Stop Ü / 8 Play/PauseUsing the MD Recorder Loading MDsPress the 0button to the right of the MD loading slots Press the 0button to close the loading slot coverPlaying MDs Changing MDs While PlayingPlaying order of MDs Press the 0 buttonSelecting a Passage within a Track on the unit only Press the MD buttonPress one of the MD buttons 1 to 3 to select an MD Track Step Number numberMD Track Step number number number To stop playing, press the 7buttonRepeating a Selection or MDs Listening About the track marks Things to Know Before You Start RecordingTo avoid erasing important recordings Erasure prevention tab Recording/EditingChanging the Display Mode Standard RecordingPress the Ü/ 8button to start the recording To stop recording, press the 7 buttonLong Recording Long REC One Touch CD Recording CD REC Prepare CDs and a recordable MD into the MD1 loading slotPress the CD REC button on the MD Recorder DISPLAYChanging the Display Mode Three CD Recording Triple RECPrepare CDs and recordable MDs Listening Edit Recording Listening Press the Listening buttonTo skip the current track, press the Skip button Repeat to program other tracksTo stop recording, press the 7button First Track Recording 1ST Track REC Prepare CDs, and a recordable MD into the MD1 loading slotPress the 1ST Track REC button Replace the CDs on the trays not selectedUsing the MD Recorder Editing Divide Function Press the Ü/ 8buttonShifted position Press the Edit buttonTotal track number increases Press the 0 button to eject the MDJoin Function Two adjacent tracks selectedTotal track number decreases Press the 0button to eject the MDEx. When you want to move the track Move FunctionEdit Ex. When you want to erase track Erase FunctionTrack number to be erased ALL Erase Function Erasing a Portion of a TrackAll track numbers disappear Erase the middle portionLetters and symbols Title FunctionGiving a Title to an MD Repeat steps 5 to 7 to enter up to 32 charactersGiving a Title to a Track Changing the TitleSelected track number appears Follow steps 4 to 10Using the Cassette Deck Playing Tape Direction Indicator on the unitRegular Play One Touch PlayFast Left and Fast Right Other Useful Features of the Cassette Deck Music ScanFinding the Beginning of the Current Selection Finding the Beginning of the Next SelectionUsing the Cassette Deck Recording ÜPlay StopPosition 1 the normal mode to position CD Direct Recording Prepare CDs. SeeInsert a blank or erasable cassette in the cassette holder Press the CD REC buttonUsing the Timers Setting the ClockMinute digits starts flashing on the display Setting the Daily Timer Set the time you want the unit to turn onSet the time you want the unit to turn off Set the Volume Level Select the source you want to listen toDisplay Turning the Daily Timer On and Off To change the Daily Timer settingBefore Turning Off the unit Setting the Recording Timer Procedure for Setting the Recording TimerOn the display Set the time you want the unit to be turned onTurning the Recording Timer On and Off SET4. Select a preset station you want to recordPress to turn the power off if necessary To change the recording timer settingSetting the Sleep Timer Procedure for Setting the Sleep TimerTo change the Sleep Timer setting To cancel the Sleep Timer settingTimer Priority Disc Lock Function Locking the DiscsUnlocking the Discs PressCare and Maintenance Troubleshooting SymptomPossible Cause Action MD Error Messages Specifications Utoc User Table Of Contents Additional InformationsSome Words about MDs Atrac Adaptive TRansform Acoustic CodingNormally When vibrated Serial Copy Management System ScmsSound Skip Guard Memory JVC 0398TTMMDWSAN

CA-MD9R specifications

The JVC CA-MD9R is a versatile and compact hi-fi mini-system that has gained popularity among music enthusiasts for its blend of modern technology and user-friendly features. This mini-system is designed to deliver high-quality audio performance while maintaining a sleek and aesthetically pleasing design.

One of the standout features of the JVC CA-MD9R is its MD (MiniDisc) playback capability, allowing users to enjoy their favorite music with exceptional sound quality. The integrated MD player supports both playback and recording, making it an excellent choice for those who wish to create personalized mixes or preserve live recordings.

Additionally, the CA-MD9R includes a built-in CD player, supporting various formats, including CD-R and CD-RW. This feature makes it versatile for users who have a collection of CDs or prefer to burn their playlists onto discs for playback. The system also supports AM and FM radio, providing a broad range of listening options with a built-in tuner for added convenience.

The audio performance of the JVC CA-MD9R is reinforced by its powerful amplifier, delivering impressive sound output that fills the room. The system features high-quality speakers designed to produce rich bass and clear treble, ensuring an enjoyable listening experience no matter the genre of music.

For those who prioritize connectivity, the JVC CA-MD9R is equipped with several input options, allowing users to connect external devices such as smartphones or MP3 players. The auxiliary line-in port enables straightforward access to personal music libraries, enhancing the versatility of the system.

Another notable characteristic of the CA-MD9R is its remote control, which provides convenience in navigating through various functions from a distance. This feature allows users to adjust the volume, change tracks, and switch between different audio sources without needing to get up from their seats.

In summary, the JVC CA-MD9R is a highly functional mini-system that caters to a variety of audio needs. With its MD and CD playback capabilities, powerful sound performance, and flexible connectivity options, it stands out in the market for those seeking an all-in-one solution for their music listening preferences. Elegant in design and rich in features, the CA-MD9R is an ideal companion for any music lover looking to enhance their audio experience.
Top Page Image Contents