JVC CA-MD9R manual MD Track Step number number number, To stop playing, press the 7button

Page 33

3. Press one of the DISC buttons (1 to 3).

The MD and track numbers start flashing.

DISC 1 DISC 2 DISC 3

MD Track Step number number number

3

3

CD

MD

2

2

1

1

PROGRAM

MD

CD

15

❏If the MD and track numbers stop flashing, press the DISC button (1 to 3) again.

4.Press the number buttons to select the tracks.

❏Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then 10. For track 32, press +10 three times, then 2.

The MD and track numbers stop flashing, and the step number is displayed.

3

3

CD

MD

2

2

1

1

PROGRAM

MD

CD

15

5. Repeat steps 3 and 4 to select other tracks for the program.

6. Press the £button.

The unit plays the tracks in the order you have programed them.

❏If you try to program a 33rd step, “MD FULL” will appear on the display.

❏If you try to program a track from an empty loading slot, or a track number that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks), such entries are ignored.

❏You can skip to a particular program step during Program Play. Rotate the MULTI JOG dial clockwise or counterclockwise on the unit, or press the 4 or ¢ buttons on the Remote Control.

❏To play the Program Play repeatedly, press the REPEAT button. For details, see “Repeating a Selection or MDs” on page 31.

To stop playing, press the 7button.

To exit Program Mode, press the PLAY MODE button twice to change to Continuous Play mode while the MD Recorder is stopped.

Checking the Program ———————————————————————

While the MD Recorder is stopped, use the 4or ¢ buttons on the Remote Control to check the contents of the program.

Each time you press the ¢button, the program contents are shown on the display in the pro- gramed order. Pressing the 4 button displays the programed steps in the reverse order.

Changing the Program ———————————————————————

Only possible while the MD recorder is stopped.

To delete a program, press the CANCEL button on the unit. Each time you press the button, the last step is erased.

If you open the loading slot cover, the program is erased.

To add a track to the program, follow the procedure above (on either the unit or the Remote Control). The new tracks are added to the end of the program.

30

Page 32 Page 34
Image 33
Page 32 Page 34
Contents
CA-MD9R If in Doubt Consult a Competent Electrician Class Laser Product How This Manual Is Organized FeaturesTable of Contents How to Put Batteries in the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the Supplied FM Antenna Using the Coaxial Type Connector Not SuppliedTo the audio output jacks Connecting an External ComponentOn the Remote Control Demo ModeOne Touch Operation To stop the Demo, press any buttonTurning the Power On and Off Using the AmplifierMulti JOG dial Press ButtonReinforcing the Bass Sound Adjusting the VolumeMuting Function For private listeningSound Modes Selecting a Sound ModeLive surround modes A. effect modesCreating Your Own Customized Sound Mode Using an External ComponentPress the AUX button on the unit or on the Remote Control Listening to an External ComponentUsing the Tuner Tuning in a StationPress the Tuner button on the unit Presetting Stations Using the unitSelecting a Radio Station Changing the FM Reception Mode Receiving FM Stations with RDSWhat Information RDS Can Provide R. M Description of the PTY codesSearching for Programs by PTY Codes PTY Search Changing the RDS InformationPress the EON ON/OFF button EON FunctionNews News You have selectedTest Function Alarm FunctionUsing the CD Player CD indicators on the unitCD indicators on the display Power comes on, and operations are done automatically Using the CD PlayerLoading CDs Place a CD, with its label side up, onto the trayPlaying CDs Changing CDs while PlayingPlaying order of CDs Programing the Playing Order of the Tracks Locating a Track with the Remote Control DirectlySelecting a Track Selecting a Passage within a Track on the unit onlyPress one of the CD buttons 1 to 3 to select a CD CD 2. Press the CD button on the Remote ControlTrack Step Number Rotate the Multi JOG dial to select a trackChanging the Program Checking the ProgramPress one of the Disc buttons 1 to Press the number buttons to select the tracksRandom Play Indicator appears on the displayRepeating a Selection or CDs Press the CD Repeat button on the unitMD indicator on the unit Using the MD Recorder PlayingMD indicators on the display Stop Ü / 8 Play/Pause Loading MDs Using the MD Recorder Press the 0button to the right of the MD loading slots Press the 0button to close the loading slot coverChanging MDs While Playing Playing MDsPlaying order of MDs Press the 0 buttonPress the MD button Selecting a Passage within a Track on the unit onlyTrack Step Number number Press one of the MD buttons 1 to 3 to select an MDTo stop playing, press the 7button MD Track Step number number numberRepeating a Selection or MDs Listening Things to Know Before You Start Recording About the track marksTo avoid erasing important recordings Erasure prevention tab Recording/EditingStandard Recording Changing the Display ModePress the Ü/ 8button to start the recording To stop recording, press the 7 buttonLong Recording Long REC One Touch CD Recording CD REC Prepare CDs and a recordable MD into the MD1 loading slotPress the CD REC button on the MD Recorder DISPLAYChanging the Display Mode Three CD Recording Triple RECPrepare CDs and recordable MDs Press the Listening button Listening Edit Recording ListeningTo skip the current track, press the Skip button Repeat to program other tracksTo stop recording, press the 7button Prepare CDs, and a recordable MD into the MD1 loading slot First Track Recording 1ST Track RECPress the 1ST Track REC button Replace the CDs on the trays not selectedUsing the MD Recorder Editing Press the Ü/ 8button Divide FunctionPress the Edit button Shifted positionTotal track number increases Press the 0 button to eject the MDTwo adjacent tracks selected Join FunctionTotal track number decreases Press the 0button to eject the MDMove Function Ex. When you want to move the trackEdit Ex. When you want to erase track Erase FunctionTrack number to be erased Erasing a Portion of a Track ALL Erase FunctionAll track numbers disappear Erase the middle portionTitle Function Letters and symbolsGiving a Title to an MD Repeat steps 5 to 7 to enter up to 32 charactersChanging the Title Giving a Title to a TrackSelected track number appears Follow steps 4 to 10Tape Direction Indicator on the unit Using the Cassette Deck PlayingRegular Play One Touch PlayFast Left and Fast Right Music Scan Other Useful Features of the Cassette DeckFinding the Beginning of the Current Selection Finding the Beginning of the Next SelectionÜPlay Stop Using the Cassette Deck RecordingPosition 1 the normal mode to position Prepare CDs. See CD Direct RecordingInsert a blank or erasable cassette in the cassette holder Press the CD REC buttonSetting the Clock Using the TimersMinute digits starts flashing on the display Setting the Daily Timer Set the time you want the unit to turn onSet the time you want the unit to turn off Set the Volume Level Select the source you want to listen toDisplay Turning the Daily Timer On and Off To change the Daily Timer settingBefore Turning Off the unit Procedure for Setting the Recording Timer Setting the Recording TimerOn the display Set the time you want the unit to be turned onSET4. Select a preset station you want to record Turning the Recording Timer On and OffPress to turn the power off if necessary To change the recording timer settingProcedure for Setting the Sleep Timer Setting the Sleep TimerTo change the Sleep Timer setting To cancel the Sleep Timer settingTimer Priority Locking the Discs Disc Lock FunctionUnlocking the Discs PressCare and Maintenance Troubleshooting SymptomPossible Cause Action MD Error Messages Specifications Additional Informations Utoc User Table Of ContentsSome Words about MDs Atrac Adaptive TRansform Acoustic CodingNormally When vibrated Serial Copy Management System ScmsSound Skip Guard Memory JVC 0398TTMMDWSAN
Top Page Image Contents