Weider WESY20000 manual

11.Attach the Leg Lever (10) to the Rail Leg (9) using an M10 x 67mm Bolt (48) and an M10 Nylon Locknut (42).

12.Attach the Backrest Rails (22) to the Backrest (13) as indicated using four M6 x 16mm Screws (31). Make sure the Backrest Rails are oriented exactly as shown.

Attach the Backrest Bracket (23) to the Backrest

(13)using two M4 x 25mm Screws (57). When

attached, the Backrest Bracket should be flush with the ends of the Backrest Rails (22).

With the Backrest (13) oriented as shown, slide the Long Lock Pin (59) through the holes in the Backrest Rails (22) and through the front holes in the Seat Carriage (11).

13.Place one end of the Long Cable (18) in a Pulley Bracket (49). Secure one of the three Cable Pulleys (50) to the Pulley Bracket using an M10 x 27mm Bolt (51) and an M10 Nylon Locknut (42). Attach the Pulley Bracket to the Left Brace (5) using an Eyebolt (53) and an M8 Nylon Locknut (37).

Attach a Pulley Bracket (49) and a Cable Pulley

(50)to the opposite end of the Long Cable (18) and attach it to the Right Brace (4) in the same manner.

11
	42
				48
	10
				9
12
		13
Wide End
			22
				31
				23
	31		57
			11	59
13	51	49	53
	50	42		37	53
				49
	18	5
					51
					50
				4	42

9