Weider WESY19510 user manual Seat Assembly

24. Attach the Long Cable (23) to the Small “U”-	24
Bracket (67) with a 1/4” Nylon Locknut (2) and a
1/4” Flat Washer (10). See the inset drawing.
Do not overtighten the Nylon Locknut; it
should be threaded onto the end of the Cable
only a couple of turns, as shown.
Attach the Small “U”-Bracket (67) to the Weight
Tube (63) with the 5/16” x 1 3/4” Bolt (72) and a
5/16” Nylon Locknut (3).	23
	67
	72
	3
	63
	10
	2
	23
	2
	67
Seat Assembly	25
25. Attach the Backrest (41) to the Front Upright (42)
with two 1/4” x 2 1/2” Screws (43) and two 1/4”
Flat Washers (10).
	42
	41
	43 10
	13