Weider WESY19001 Frame Assembly ARM Assembly, Tighten all Nylon Locknuts used in steps 3 through

Page 10

FRAME ASSEMBLY

ARM ASSEMBLY

8.Attach the Top Frame (55) to the Weight Guides (62) using a 5/16” x 6” Bolt (60), two 1/2” x 1/2” Spacers (61), and a 5/16” Nylon Locknut (3) as shown.

Tighten all Nylon Locknuts used in steps 3 through 8.

9.Lubricate a 3/8” x 4” Bolt (16). Attach the Press Frame (17) to the Base (4) using the Bolt and a 3/8” Nylon Locknut (21). Do not overtighten the Nylon Locknut; the Press Frame must be able to pivot freely.

10.Press a 1 3/4” Square Inner Cap (44) and a 1” Round Inner Cap (49) into the indicated end of each Press Arm (46).

Attach the Press Arms (46) to the Press Frame (17) using four 5/16” x 2 1/2” Bolts (22) and four 5/16” Nylon Locknuts (3).

8
	61
	3
	55
60
	62
9
	17
	16—Lubricate
	4
	21
10	44
	44
	49
	46
	3
	22
46	17

10

Image 10

Contents QUESTIONS? Model No. WESY19001 Serial NoTable of Contents Important Precautions Before YOU Begin Part Identification Chart Page Assembly Make Assembly Easier for YourselfBase is oriented exactly as shown Frame AssemblyNylon Locknuts yet Locknuts yet Frame Assembly ARM Assembly Tighten all Nylon Locknuts used in steps 3 throughARM Assembly Overtighten the Nylon Locknut. The Pulley ARM Assembly Cable AssemblyIndicated bracket on the Top Frame Must be able to turn freelyLocknut. The Pulley Bracket must be able to pivot freely Nylon Locknut yet Locknut. The Pulley must be able to turn freelyLocknuts the Pulleys must be able to turn freely Cable Assembly Seat Assembly TROUBLE-SHOOTING and Maintenance on Adjustment Changing the Weight SettingWeight Resistance Chart TROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagram Part LIST-Model No. WESY19001 Key No. Qty DescriptionR0201A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT