Weider WESY19001 user manual Cable Diagram

Page 21

CABLE DIAGRAM

The diagram below shows the proper routing of the Short Cable (23) and the Long Cable (69). Use the diagram to be sure that the cables and the cable traps have been assembled correctly. If the cables have not been cor- rectly routed, the training system will not function properly and damage may occur. The cable traps should be positioned so that the cables will not come off the pulleys. Be sure that the cable traps do not touch or bind the cables.

2 3

7	1—High Pulley

8—Weight

Stack

5

6

4

Short Cable—23

3

	6
4	7	9—Leg Lever
4

8

5

1—Low Pulley

Long Cable—69

2

21

Image 21

Contents Model No. WESY19001 Serial No QUESTIONS?Table of Contents Important Precautions Before YOU Begin Part Identification Chart Page Make Assembly Easier for Yourself AssemblyFrame Assembly Base is oriented exactly as shownNylon Locknuts yet Locknuts yet Tighten all Nylon Locknuts used in steps 3 through Frame Assembly ARM AssemblyARM Assembly Indicated bracket on the Top Frame ARM Assembly Cable AssemblyOvertighten the Nylon Locknut. The Pulley Must be able to turn freelyLocknut. The Pulley Bracket must be able to pivot freely Locknut. The Pulley must be able to turn freely Nylon Locknut yetLocknuts the Pulleys must be able to turn freely Cable Assembly Seat Assembly TROUBLE-SHOOTING and Maintenance on Changing the Weight Setting AdjustmentWeight Resistance Chart Tightening the Cables TROUBLE-SHOOTING and MaintenanceCable Diagram Key No. Qty Description Part LIST-Model No. WESY19001R0201A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT