Weider WESY19001 user manual ARM Assembly

Page 11

ARM ASSEMBLY

11.Attach the Seat Plate (37) to the Seat Frame (36) using a 1/4” x 2 1/4” Carriage Bolt (38), a 1/4” Flat Washer (78), and a 1/4” Nylon Locknut (2).

12.Attach a Bumper (11) to the Seat Frame (36) using a #10 x 1” Screw (80).

13.Attach the Seat Frame (36) to the Front Upright (42) using two 3/8” x 3 1/4” Bolts (8), a Back Plate (71), and two 3/8” Nylon Locknuts (21).

14.Press a 1 1/2” Square Inner Cap (32) into each end of the Leg Lever (29) and the indi- cated end of the Seat Frame (36).

Lubricate a 5/16” x 2 1/2” Bolt (22). Attach the Leg Lever (29) to the Seat Frame (36) using the Bolt and a 5/16” Nylon Locknut (3). Do not overtighten the Nylon Locknut; the Leg Lever must be able to pivot freely.

11

11
		38
	36		37
	36
			78
			2
12
	36
		11	80
			80
13
		42
8
71
			21
			36
14
32
		36
			22
			32
3			29
			29
			32

Image 11

Contents Model No. WESY19001 Serial No QUESTIONS?Table of Contents Important Precautions Before YOU Begin Part Identification Chart Page Make Assembly Easier for Yourself AssemblyNylon Locknuts yet Frame AssemblyBase is oriented exactly as shown Locknuts yet Tighten all Nylon Locknuts used in steps 3 through Frame Assembly ARM AssemblyARM Assembly Must be able to turn freely ARM Assembly Cable AssemblyIndicated bracket on the Top Frame Overtighten the Nylon Locknut. The PulleyLocknut. The Pulley Bracket must be able to pivot freely Locknuts the Pulleys must be able to turn freely Locknut. The Pulley must be able to turn freelyNylon Locknut yet Cable Assembly Seat Assembly TROUBLE-SHOOTING and Maintenance on Changing the Weight Setting AdjustmentWeight Resistance Chart Tightening the Cables TROUBLE-SHOOTING and MaintenanceCable Diagram Key No. Qty Description Part LIST-Model No. WESY19001R0201A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty