Weider PRO 9400 user manual Press a 1 1/2Ó Square Inner Cap 32 into the Leg Lever

Page 19

41.Press a 1 1/2Ó Square Inner Cap (32) into the Leg Lever (29).

Lubricate the 5/16Ó x 2 1/4Ó Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame

(36)with the Bolt and a 5/16Ó Nylon Locknut

Insert the 5/16Ó x 2Ó Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16Ó Nylon Locknut (3) with a 5/16Ó Flat Washer (8) onto the Eyebolt.

42.Rest the Front Seat Frame (36) on the indicat- ed pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16Ó x 2 3/4Ó Carriage Bolt (14), 3/16Ó Flat Washer (8), and the Seat Knob (40).

SEAT ASSEMBLY

43.Press two 3/4Ó Round Inner Caps (34) into each Pad Tube (28).

Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.

Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end of the Pad Tube.

19

41
		36
33		3
33
		29
35		8
35
		3
	32
42
	42	40
		40
		8
14		36
Pin
43
		30
		34
		28
29	34
29
30

Image 19

Contents Model No. WESY39100 Serial No QUESTIONS?Customer HOT Line Limited Warranty Table of ContentsImportant Precautions Decal No Before YOU BeginÒframe ASSEMBLY.Ó AssemblyFrame Assembly Following Tools not Included are Required for AssemblyNylon Locknuts yet Tighten all Nylon Locknuts used in steps 1Ð5 Tube is sitting in the pin grooves in the top Weight Òarm ASSEMBLY.Ó Frame Assembly ARM AssemblyRetainers bend toward the Round Cover Cap, as shown Do not tighten the Nylon Locknut yetARM Assembly Cable Assembly Nylon Locknut the Pulley Bracket Must be able to move freely Long Cable Trap is positioned to hold Cable in placeCable Assembly Cable AssemblyCable Assembly Make sure that the Cable 72 is between Locate the Leg Press Cable 78. Attach Òseat ASSEMBLY.Ó Seat AssemblyPress a 1 1/2Ó Square Inner Cap 32 into the Leg Lever Seat Assembly Changing the Weight Setting HOW to USE the Home GYM SystemAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Plates Weight Resistance ChartTightening the Cables TROUBLE-SHOOTING and MaintenanceHigh Cable Cable DiagramsHigh Cable 58 and Low Cable TOP ViewLeg Press Cable Military Press Cable 72 and Leg Press CablePage Page Page Page Part LISTÑModel No. WESY39100 Exploded DRAWINGÑModel No. WESY39100 Ordering Replacement Parts