Weider PRO 9400 user manual Seat Assembly

Page 20

44.Remove the adhesive backing from the PRO 9400 decal and apply it to the Front Upright (42) under the ÒWEIDERÓ nameplate as shown.

44

PRO 9400

Decal

42

42

SEAT ASSEMBLY

45.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in HOW TO USE THE HOME GYM SYSTEM, beginning on page 21 of this manual.

Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on page 25 and 26 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTENANCE on page 24.

20

Image 20

Contents Customer HOT Line QUESTIONS?Model No. WESY39100 Serial No Table of Contents Limited WarrantyImportant Precautions Before YOU Begin Decal NoAssembly Frame AssemblyFollowing Tools not Included are Required for Assembly Òframe ASSEMBLY.ÓNylon Locknuts yet Tighten all Nylon Locknuts used in steps 1Ð5 Tube is sitting in the pin grooves in the top Weight Frame Assembly ARM Assembly Òarm ASSEMBLY.ÓDo not tighten the Nylon Locknut yet Retainers bend toward the Round Cover Cap, as shownARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Nylon Locknut the Pulley Bracket Must be able to move freelyCable Assembly Assembly CableCable Assembly Make sure that the Cable 72 is between Locate the Leg Press Cable 78. Attach Seat Assembly Òseat ASSEMBLY.ÓPress a 1 1/2Ó Square Inner Cap 32 into the Leg Lever Seat Assembly HOW to USE the Home GYM System Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagrams High Cable 58 and Low CableTOP View High CableMilitary Press Cable 72 and Leg Press Cable Leg Press CablePage Page Page Page Part LISTÑModel No. WESY39100 Exploded DRAWINGÑModel No. WESY39100 Ordering Replacement Parts