Weider PRO 9400 user manual Tube is sitting in the pin grooves in the top Weight

Page 8

FRAME ASSEMBLY

7.Press a Weight Tube Bumper (64) into the end of a Weight Tube (63). Insert the Weight Tube into the front stack of Weights (25). Be sure that the pin on the Weight Tube is sit- ting in the pin grooves in the top Weight.

Lubricate the inside of the holes in the Top Weight (65). Set the Top Weight onto the front stack of Weights (25). Insert both Long Weight Guides (62) into the stack of Weights.

Be sure that the holes in the Weight Guides are at the top, as shown.

8.Press a Weight Tube Bumper (64) into the end of the other Weight Tube (63). Insert the Weight Tube into the rear stack of Weights (25). Be sure that the pin on the Weight

Tube is sitting in the pin grooves in the top Weight.

Lubricate the inside of the holes in the other Top Weight (65). Set the Top Weight onto the rear stack of Weights (25). Insert both Short Weight Guides (73) into the stack of Weights.

Be sure that the holes in the Weight Guides are at the top, as shown.

8

7	Holes
	Holes
	62
	65
	Lubricate
	Pin
	63
	64
	Pin Grooves
	25
8	Holes
	Holes
	73
	Lubricate
	65
	Pin
	63
	64
	Pin Grooves
	25

Image 8

Contents Customer HOT Line QUESTIONS?Model No. WESY39100 Serial No Table of Contents Limited WarrantyImportant Precautions Before YOU Begin Decal NoAssembly Frame AssemblyFollowing Tools not Included are Required for Assembly Òframe ASSEMBLY.ÓNylon Locknuts yet Tighten all Nylon Locknuts used in steps 1Ð5 Tube is sitting in the pin grooves in the top Weight Frame Assembly ARM Assembly Òarm ASSEMBLY.ÓDo not tighten the Nylon Locknut yet Retainers bend toward the Round Cover Cap, as shownARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Nylon Locknut the Pulley Bracket Must be able to move freelyCable Assembly Assembly CableCable Assembly Make sure that the Cable 72 is between Locate the Leg Press Cable 78. Attach Seat Assembly Òseat ASSEMBLY.ÓPress a 1 1/2Ó Square Inner Cap 32 into the Leg Lever Seat Assembly HOW to USE the Home GYM System Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagrams High Cable 58 and Low CableTOP View High CableMilitary Press Cable 72 and Leg Press Cable Leg Press CablePage Page Page Page Part LISTÑModel No. WESY39100 Exploded DRAWINGÑModel No. WESY39100 Ordering Replacement Parts