Weider WESY85104 user manual High Pulley Butterfly

Page 16

31.Remove the decals from the decal sheet (not shown) and apply them to the home gym system in the loca- tions shown below.

31

HIGH PULLEY

BUTTERFLY

8510

BENCH PRESS

LEG EXTENSION

LEG CURL

LOW PULLEY

32.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 17 of this manual.

Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 20 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTE- NANCE on page 19.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents QUESTIONS? Customer HOT LineTable of Contents Important Precautions Using the Weider 8510 home gym system. If you Before YOU BeginFrame Assembly AssemblyFollowing Tools not Included are Required for Assembly Nylon Locknuts yet ARM ARM Assembly Cable Assembly Cable Assembly Complete the assembly of several pre Attached parts Cable Assembly Cable Assembly Seat Assembly Locknut. The Leg Lever must be able to Pivot freelySeat Assembly High Pulley Butterfly Adjustment Changing the Weight SettingAttaching and Removing the Seat Weight Resistance ChartAttaching the LEG Lever to the LOW Pulley Station Troubleshooting and Maintenance Tightening the CablesCable Diagram Page Part LIST-Model No. WESY85104 Exploded DRAWING-Model No. WESY85104 Part Identification CHART-Model No. WESY85104 R1102A Page Page Ordering Replacement Parts Limited Warranty
Top Page Image Contents