Weider WESY85104 user manual Cable Diagram

Page 20

CABLE DIAGRAM

The cable diagram below shows the proper routing of the Short Cable (58) and the Long Cable (23). Use the diagram to be sure that the two cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the home gym system will not function properly and damage may occur. The numbers show the correct route for each cable. The starting and ending points of each cable are labeled. Be sure that the cable traps do not touch or bind the cables.

2

1—High Pulley

7

3

5

4

Long Cable (23) TOP VIEW

6

5—Long “U”-Bracket

Short Cable (58)

Weight Stack— 8

4

3

1—Low Pulley

2

20

Image 20

Contents QUESTIONS? Customer HOT LineTable of Contents Important Precautions Using the Weider 8510 home gym system. If you Before YOU BeginFollowing Tools not Included are Required for Assembly AssemblyFrame Assembly Nylon Locknuts yet ARM ARM Assembly Cable Assembly Cable Assembly Complete the assembly of several pre Attached parts Cable Assembly Cable Assembly Seat Assembly Locknut. The Leg Lever must be able to Pivot freelySeat Assembly High Pulley Butterfly Adjustment Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Weight Resistance ChartAttaching and Removing the Seat Troubleshooting and Maintenance Tightening the CablesCable Diagram Page Part LIST-Model No. WESY85104 Exploded DRAWING-Model No. WESY85104 Part Identification CHART-Model No. WESY85104 R1102A Page Page Ordering Replacement Parts Limited Warranty