Weider WESY85104 user manual Seat Assembly

Page 15

SEAT ASSEMBLY

29. Rest the Seat Frame (36) on the indicated pin	29
in the Front Upright (42). Attach the Seat	29
in the Front Upright (42). Attach the Seat
Frame to the Front Upright with a 5/16” x
2 3/4” Carriage Bolt (14) and the Seat Knob
(40).
		40
		36
	14
	Pin
	42
30. Press 3/4” Round Inner Caps (34) into the	30
ends of both 12 1/2” Pad Tubes (28).	30
ends of both 12 1/2” Pad Tubes (28).
Insert one 12 1/2” Pad Tube (28) into the
Seat Frame (36). Slide a 5 1/2” Pad (30) onto
each end of the Pad Tube.
Insert the other 12 1/2” Pad Tube (28) into the
Leg Lever (29). Slide a 5 1/2” Pad (30) onto
each end of the Pad Tube.
	36	30
	36	34
		28
		34
		30
		29

15

Image 15

Contents Customer HOT Line QUESTIONS?Table of Contents Important Precautions Before YOU Begin Using the Weider 8510 home gym system. If youAssembly Frame AssemblyFollowing Tools not Included are Required for Assembly Nylon Locknuts yet ARM ARM Assembly Cable Assembly Cable Assembly Complete the assembly of several pre Attached parts Cable Assembly Cable Assembly Locknut. The Leg Lever must be able to Pivot freely Seat AssemblySeat Assembly High Pulley Butterfly Changing the Weight Setting AdjustmentWeight Resistance Chart Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Tightening the Cables Troubleshooting and MaintenanceCable Diagram Page Part LIST-Model No. WESY85104 Exploded DRAWING-Model No. WESY85104 Part Identification CHART-Model No. WESY85104 R1102A Page Page Limited Warranty Ordering Replacement Parts