19. Apply grease to a 2 3/4" Bushing (65) and insert | 19 |
|
the Bushing into the Left Base (2). Attach the |
| |
|
| |
Press Frame to the Left Base (2) with an M10 x |
| 13 |
90mm Bolt (102) and an M10 Nylon Locknut (84). |
| |
| 84 | |
|
| |
|
| 2 |
|
| 102 |
|
| 65 |
|
| Grease |
20. Attach the Right Press Arm (26) to the Press | 20 |
|
Frame (13) with two M10 x 70mm Bolts (57) and |
| |
|
| |
two M10 Nylon Locknuts (84). |
| 25 |
|
| |
Attach the Left Press Arm (25) to the Press |
|
|
Frame (13) in the same manner. |
|
|
|
| 57 |
|
| 84 |
|
| 13 |
| 26 |
|
21. Apply grease to an M10 x 70mm Bolt (57). Attach | 21 |
|
a Press Arm Handle (27) to the Right Press Arm |
| |
|
| |
(26) with the Bolt and an M10 Nylon Locknut (84). |
|
|
Do not overtighten the Nylon Locknut; the |
| 57 |
Press Arm Handle must be able to pivot easily. |
| |
| 27 | |
|
| |
Repeat this step with the other Press Arm |
| Grease |
|
| |
Handle (27) and the Left Press Arm (25). |
| 25 |
| 84 | |
| 27 | |
|
| |
|
| 26 |
22. Apply grease to a 2 3/4" Bushing (65) and insert | 22 |
|
the Bushing into the Press Leg (21). Next, orient |
| |
|
| |
the Leg Press with the welded spacer on the indi- |
|
|
cated side and attach the Leg Press to the Left |
| 12 |
Base (2) with an M10 x 95mm Bolt (107) and an |
| Welded |
M10 Nylon Locknut (84). |
| |
| Spacer | |
|
| |
|
| 2 |
|
| 107 |
|
| 65 |
|
| Grease |
|
| 84 |
| 14 |
|