Weider WESY3906.0 user manual

27.Wrap the Butterfly Cable (73) around a Pulley

(43). Attach the Pulley, a Cable Trap (48), an M10 Washer (108), and two Guards (45) to the Right Butterfly Arm (23) with an M10 x 50mm Bolt (105) and an M10 Nylon Locknut (84). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley.

28.Wrap the Butterfly Cable (73) under a “V”-pulley (44). Attach the “V”-pulley, a Long Cable Trap (83), an M10 Washer (108), and two Guards (45) to the Right Upright (7) with an M10 x 150mm Bolt (94) and an M10 Nylon Locknut (84). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the “V”-pulley.

29.Wrap the Butterfly Cable (73) over a Pulley (43). Attach the Pulley to the Right Top Frame (3) with an M10 x 40mm Bolt (104) and an M10 Nylon Locknut (84).

30.Wrap the Butterfly Cable (73) under a Pulley (43). Attach the Pulley, a Cable Trap (48), and two Half Guards (46) at the second hole from the top of the two Pulley Plates (49) with an M10 x 50mm Bolt (105) and an M10 Nylon Locknut (84). Make sure that the Cable Trap is oriented to hold the Cable in the groove of the Pulley. Make sure the Half Guards are oriented as shown.

27	84
	48	45
	43	73
	108
	45
	23
	105
28	84		45
			83
	44
	73		108
	45			7
				94
29		84		3
			73
	43
				104
30
		84
			48
				73
		46		46
		49	43	105
				49

16