Haier HWM70-918NZP user manual How to use the washing powder

Page 10

The capacity of washing and spinning of the machine refer to the largest weight

of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity.

The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing.

Do not select high water level for laundries less than 1.0kg ,so as to avoid splashing of water.

How to use the washing powder

Directly dissolved in the machine: (not applicable for fuzzy program )

1.Fill small quantity of water.

2.Add the powder. Run for 30 seconds to dissolve it completely.

3.Put in the laundries. Select suitable water level.

The instant dissolving of the washing powder:

1. Prepare warm water of 30 °C and a container.

2. Add the powder while stirring to fully dissolve it.

If you select the quick program, it is suggested to adopt liquid detergent instead of washing powder to guarantee the washing effect.

Put in the proper quantities detergent according to the water level and the laundries quantities.

It is suggested not to use high sudsing detergent. Washing powder with poor quality or long time storage maybe caked. Please pay attention to cleaning the detergent box in time.

Access for detergent

Washing powder box

How to use the softener

 

 

The usage and dose of the softener as per the specifications of softener.

 

Figure 1

Turn the inner tub,you will find a softener inlet as the figure 1,open the

 

 

 

cover,put the softener into the inlet as the figure 2.Before washing,close

 

 

the cover and the softener will drop into the inner tub during the last time

 

Access for softener

rinsing.

 

 

After the softener is put in,please don’t place for a long time otherwise

 

 

softener may solidify and cause flowing not smooth.

Open

Close

How to use the whitener

Figure 2

Control panel seat

Fill water to decided level. Dilute the whitener with

 

container. Pour it slowly into the washing tub.

 

Avoid using whitener on laundries with color or

 

pattern as they are prone to lose color.

 

The whitener shall not touch the laundries directly.

 

Refer to the user’s manual for the usage and

Liquid whitener inlet

quantity of the whitener.

For powder whitener, please dissolve it before using.

10

Image 10
Contents Index Safety precautions Meaning and description of the symbolsPage Fully automatic Water inlet hose Bottom plate Tapping screws Installation and adjustment Confirm the water faucet Fasten the four screws evenly. See to FigureConnection between the water inlet hose and the washer Dismantle the water inlet hoseHow to change the direction of the drain hose Preparation before washing Pay attention to followings before washing the laundriesHow to use the washing powder Use the operation buttons Push button to select suitable procedure program Confirm the operation of Delay program Disposal after washingCleaning the lint filter Trouble-shooting Answer to question Specification Phenomena