Haier HWM70-918NZP user manual Push button to select suitable procedure program

Page 12

1

2

Push the “ ” button to switch on the power

It has the special power resume function. In the case of power failure or the power plug is loose during running, the machine can save the running program, and resume the program after the power supply is recovered. You do not need to set the program again.

Push the “ Program” button to select suitable automatic program

3

4

5

After the power is switched on, “Memory” is automatically set. To select other full-auto programs, please push the “Program” button till the corresponding indicator is on. Refer to the “Program” button on Page 11.

E.g. Set to “Quick”program for small quantity of laundries with light soil.

When a standard cycle is selected, the fuzzy program is run. The water level and the washing time can be selected according to be texture and volume of the laundry. The washing cycle is automatically controlled.

Push “” “” “” button to select suitable procedure program

Even there’s no water in the tub, a certain period is required before spin starting. Separate the laundries that are not colorfast from other laundries in washing.

After the machine starts operation, you can only set the program and procedure during washing and soaking,

During rinsing ,you can only set the spinning time, and can not make setting in other cases. During Quick, Tub Dry programs, push the Wash, Rinse,Spin button the machine has

no reaction.

Push the “ Water ” button, select suitable water level

level

For Standard program, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically.To select other water level, first push the “Start/Pause” button, then push the “Water Level” button to set the water level.

Push the “ Reserve ” button, select suitable reserve water times

Water

If you choose “1st Rinse” and ”2nd Rinse” together ,the machine will keep the after first and second rinsing water .

12

Image 12
Contents Index Safety precautions Meaning and description of the symbolsPage Fully automatic Water inlet hose Bottom plate Tapping screws Installation and adjustment Confirm the water faucet Fasten the four screws evenly. See to FigureConnection between the water inlet hose and the washer Dismantle the water inlet hoseHow to change the direction of the drain hose Preparation before washing Pay attention to followings before washing the laundriesHow to use the washing powder Use the operation buttons Push button to select suitable procedure program Confirm the operation of Delay program Disposal after washingCleaning the lint filter Trouble-shooting Answer to question Specification Phenomena