Haier HWM70-918NZP user manual Safety precautions, Meaning and description of the symbols

Page 2

Safety precautions

Meaning and description of the symbols

Warning sign

Forbidden sign

Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user.

Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user.

Please check if the power receptacle has good earthing condition before using to guarantee your safety.

Please check if the water faucet is open, and if the connection of the water inlet pipe is proper.

It is suggested to use foamless washing powder.

Please don’t use the washer in the environment below 0 °C; if the washer has been stored below 0°C, please be sure to ensure the washer is placed under the room temperature for 2~4 hours and then use otherwise the washing effects may be lowered or the washer may be damaged.

Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phase three pins receptacle.The earthing terminal of

the receptacle must be earthed reliably. If possible,please adopt electric leakage protector.

The washing machine must be positioned so that the plug is accessible. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or cleaning the machine.

Do not plug or pull the power plug with wet hand.

Do not bend ,extend, twist, bind or alter the power cord by force. Do not press or nip it with weight.

Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacles loose, do not use the plug any more.

2

Image 2
Contents Index Safety precautions Meaning and description of the symbolsPage Fully automatic Water inlet hose Bottom plate Tapping screws Installation and adjustment Confirm the water faucet Fasten the four screws evenly. See to FigureConnection between the water inlet hose and the washer Dismantle the water inlet hoseHow to change the direction of the drain hose Preparation before washing Pay attention to followings before washing the laundriesHow to use the washing powder Use the operation buttons Push button to select suitable procedure program Confirm the operation of Delay program Disposal after washingCleaning the lint filter Trouble-shooting Answer to question Specification Phenomena