Defy Appliances WMY 71283 MLCM manual Starting the programme, Loading door lock

Page 19
If no change is allowed, the relevant light will flash for 3 times.
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.

If you want to cancel End Time function, press On / Off button to turn off and on the machine.

C

1Open the loading door, place the laundry and put detergent, etc.

2Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

3Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.

4Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end time on the display starts flashing.

C Additional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears on the display.

When the End Time selection is completed, the time appears on the screen consists of end time plus the duration of the selected programme.

4.3.9Starting the programme

1.Press Start / Pause button to start the programme.

2.Programme follow-up light showing the startup of the programme will turn on.

C If no programme is started or no key is pressed within 1-10 minute during programme selection process, the machine will switch to OFF mode. Display and all indicators are turned off.

Selected programme data will be displayed if you press On / Off button.

4.3.10 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.

"Door Locked" LED in the panel turns on when the loading door is locked.

4.3.11Changing the selections after the programme has started

After the programme has started you can make the following changes.

4.3.11.1 Switching the machine to pause mode:

Press the Start/Pause button to switch the machine to pause mode while a programme is running. The light indicating the Start/Pause status and programme step starts flashing on the Programme Follow-up indicator to show that the machine has been switched to the pause mode. Also, Loading Door light will also flash until the door is ready to be opened. When the loading door is ready to be opened loading door light will will turn off and programme step indicator and Start / Stop LED continue to flash.

Also, when the loading door is ready to be opened, Loading Door light will also turn off in addition to the programme step light.

4.3.11.2 Changing the auxiliary function, speed and temperature

Depending on the step the programme has reached, you can cancel or select the auxiliary functions. See, "Auxiliary function selection".

You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature selection".

C

Washing Machine / User’s Manual

19 / EN

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Document Number Please Register Your Machine AT Dear Customer Explanation of symbolsImportant instructions for safety and environment Disposing of the waste machine Package information Compliance with Weee DirectiveRated capacity kg Complying Commission Delegated Regulation EU No 1061/2010Removing packaging reinforcement InstallationAppropriate installation location Damaged products cause risks for your safetyConnecting the drain hose to the drain Connecting water supplyFor cold water inlet Do not make connections via extension cables or multi-plugs Adjusting the feetElectrical connection Initial usePreparation 11 / EN Using detergent and softenerDo not use bleaching agent and detergent by mixing them Using bleaches12 / EN Tips for efficient washing Spin speed selection LEDs Start / Pause button Operating the productControl panel Programme selection knobProgrammes Programme selectionCottons Use to drain the water in the machine Temperature selectionUse when you want to rinse or starch separately Spin speed selectionProgramme and consumption table End Time Auxiliary function selection18 / EN Loading door lock Switching the machine to pause modeChanging the auxiliary function, speed and temperature Starting the programmeChild Lock Canceling the programmeYour machine features Standby Mode Adding or taking out laundryCleaning the body and control panel Maintenance and cleaningCleaning the detergent drawer Cleaning the loading door and the drumReplace the filter Draining remaining water and cleaning the pump filterOrder to clean the dirty filter and discharge the water Turn and remove the pump filterProblem Reason Solution 24 / EN According to the water hardness Clean the dispenser with hot waterŠŠCall the Authorized Service Agent WashingOwner’s responsibility Av da Industrias, Parcela No.735 * 735A Machava, Maputo Service CentresPatterson Road, North End, Port Elizabeth 6001 Botswana Tel +267 390 3996 I 390 Fax +267 31828 / EN Warranty
Top Page Image Contents