Defy Appliances WMY 71283 MLCM Adding or taking out laundry, Child Lock, Canceling the programme

Page 20
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped.

4.3.11.3 Adding or taking out laundry

1.Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.

2.Wait until the Loading Door can be opened.

3.Open the Loading Door and add or take out the laundry.

5.Close the Loading Door.

6.Make changes in auxiliary functions, temperature and speed settings if necessary.

7.Press Start/Pause button to start the machine.

4.3.12Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.

C

4.3.12.1 To activate the child lock:

Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on the panel, "Child lock enabled" light will turn on. You can release Auxiliary Function button 2 when this warning is displayed.

4.3.12.2 To deactivate the child lock:

Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on the panel, "Child lock enabled" light will turn off.

4.3.13 Canceling the programme

The programme is cancelled when the machine is turned off and on again. Press and hold On / Off button for 3 seconds.

C If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child Lock first.

If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to Pump+Spin programme and discharge the water in the machine.

4.3.14 End of programme

End LED appears on the display when the programme is completed.

If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators are turned off.

Completed programme steps will be displayed if you press On / Off button.

4.3.15 Your machine features "Standby Mode".

After you switch on your machine with On-Off button, if no program is started or no other procedure is performed at the selection step or no action is taken within approx. 10 minutes after the selected program ends, your machine will switch to OFF mode automatically. Display and all indicators are turned off. Selected programme data will be displayed if you press On / Off button. Before you start the program, check the accuracy of your selections. If necessary, repeat them. This is not an error.

20 / EN

Washing Machine / User’s Manual

Image 20
Contents  Document NumberDear Customer Explanation of symbols Please Register Your Machine ATImportant instructions for safety and environment Disposing of the waste machine Compliance with Weee Directive Package informationComplying Commission Delegated Regulation EU No 1061/2010 Rated capacity kgInstallation Appropriate installation locationDamaged products cause risks for your safety Removing packaging reinforcementFor cold water inlet Connecting water supplyConnecting the drain hose to the drain Adjusting the feet Electrical connectionInitial use Do not make connections via extension cables or multi-plugsPreparation Using detergent and softener 11 / EN12 / EN Using bleachesDo not use bleaching agent and detergent by mixing them Tips for efficient washing Operating the product Control panelProgramme selection knob Spin speed selection LEDs Start / Pause buttonCottons Programme selectionProgrammes Temperature selection Use when you want to rinse or starch separatelySpin speed selection Use to drain the water in the machineProgramme and consumption table 18 / EN Auxiliary function selectionEnd Time Switching the machine to pause mode Changing the auxiliary function, speed and temperatureStarting the programme Loading door lockCanceling the programme Your machine features Standby ModeAdding or taking out laundry Child LockMaintenance and cleaning Cleaning the detergent drawerCleaning the loading door and the drum Cleaning the body and control panelDraining remaining water and cleaning the pump filter Order to clean the dirty filter and discharge the waterTurn and remove the pump filter Replace the filterProblem Reason Solution 24 / EN Clean the dispenser with hot water ŠŠCall the Authorized Service AgentWashing According to the water hardnessOwner’s responsibility Service Centres Patterson Road, North End, Port Elizabeth 6001Botswana Tel +267 390 3996 I 390 Fax +267 318 Av da Industrias, Parcela No.735 * 735A Machava, MaputoWarranty 28 / EN