Opening the door/Loading the washing
1.To open the door: carefully pull the handle on the door.
2. Unfold the washing and load it loosely into the machine. Mix large and small items.
Important: Do not get any washing caught between the door and the rubber seal.
3.Push the door firmly shut.
CURRENT LOAD/DETERGENT display
3 If settings are not undertak- |
| DELICATES 30°C |
| ||
en for several seconds during |
| 1000 RPM |
|
| |
|
|
| |||
the programme setting proc- |
|
|
| § |
|
|
|
|
| ||
ess or when loading with |
|
| ##################======] |
| |
|
|
| |||
laundry, the following indi- |
|
| MAXIMUM LOAD | 3,5 KG |
|
|
|
| |||
cators appear on the display |
|
| CURR. LOAD¶¶¶¶¶ ¶¶2 KG |
| |
|
|
| |||
|
| DETERGENT ¶¶¶¶¶¶¶¶¶ 80 % |
| ||
when the machine door is |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
open: |
|
|
|
|
|
–the maximum permissible loading for the programme marked,
–the actual loading. This is also displayed by the bars (loads of less than 0.5kg are not displayed),
–and washing agent measurement, with reference to the volume of laundry, as recommended by the washing agent manufacturer.
If too much laundry has been loaded into the machine, the following indicator appears in the display OVERLOADING. Please remove the rele- vant amount of laundry in such cases.
Press any button or turn any knob to undertake more programme settings.
3 If the laundry is removed again before the programme starts, the CURR. LOAD display may not change back to 0. If this occurs, please turn the machine off and switch it back on again after approx. 3 seconds. Reset the programme and refill machine with laundry.
The CURR. LOAD display goes out if the machine is closed.
18