Electrolux 1620 Washing cycle complete/Removing the washing, If Rinse Hold has been selected

Washing cycle complete/Removing the washing

At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the § symbol appears, the door can be opened.

1.Open the door using the handle.

2.Remove the washing.

3.Close the water tap.

4.Switch off the appliance.

If Rinse Hold has been selected:

1.Press the START key.

DELICATES 30°C
RINSE HOLD	11:28-11:28
START	§
	RINSE HOLD
	######################
RINSE H.

The display automatically changes to the first pro- gramme page. Depending upon the programme that has been running either SPIN or SHORT SPIN is highlight- ed.

SHORT SPIN

1200 RPM 12:28-12:34

START	ú
	EASY IRON
	REFRESH
1200	FASHION
	SHORT SPIN)
OPTIONS	SPIN

If spinning or draining is required:
Use the control knob to		SPIN
highlight either
	1200 RPM	11:28-11:39
– SPIN or	START	ú
– DRAIN.		FASHION
		SHORT SPIN
2. Reduce the spin speed, if	1200	SPIN)
		STARCH
	OPTIONS	DRAIN
necessary. The spin speed
cannot be increased. This
protects the fabric.

3.Press the START key.

The washing is spun or the water is drained.

3 If OVERDOSING is shown in the display at the end of a wash cycle, too much detergent was used in the completed wash programme. Please take note of the dosage instructions provided by the detergent manu- facturer and the amount of washing loaded the next time you wash.

21