Electrolux 1620 manual Water inlet, 35m long pressure hose is supplied with the appliance

Page 42

Water inlet

A 1.35m long pressure hose is supplied with the appliance.

If a longer inlet hose is required, only hoses from the manufacturer are to be used. Your local Service Force stocks hose kits of different lengths.

3 Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts. Do not use any other sealing rings.

Important! All threaded hose fit- tings must only be tightened by hand.

1.Connect the hose with the right-an-

gle connector to the machine.

Important! Do not position the inlet hose vertically downwards. Position it to the right or the left as shown in the illustration.

2.Connect the hose with the straight

connector to a water tap with an R ¾ (inch) screw thread.

3. Slowly turn on the tap and check that all connections are watertight.

42

Image 42

Contents Lavamat Lavalogic Following symbols are used in the text Dear CustomerContents Safety information concerning installation Child safety deviceChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardPress the control knob to switch off the appliance Indicators in the display Description of the applianceControl panel with display Main control features Control knobKeys Programme overview ProgrammeIKN Short Spin Icates, woollens, silk Preparing and sorting washing Setting the timeBefore the first wash Carrying out a wash programme prior to first useChanging the temperature Switching on the applianceSetting a programme Running a wash cycleSelecting options Press the Select key. The symbol appears in the display Press the Select key Symbol appears in the displayPress the Options key Opening the door/Loading the washing Current LOAD/DETERGENT displayIf you are using liquid detergent Adding detergent/conditionerWashing powder/tablets for the main wash cycle Interrupting a programme/Adding washing Starting a programmeProgramme progress Interrupting a programmeWashing cycle complete/Removing the washing If Rinse Hold has been selectedSetting extra options Saving a programme setting Press the Save keyThen press the Back key 3 times Clearing a stored programme setting Press the Clear keyLanguage Start the programme Setting programme protectionProgramme protection Removing programme protectionChild safety device Deactivating the child safety deviceWashing drum Cleaning and careDetergent drawer Door and rubber collarWhat to do if Remedying small malfunctions yourselfOnly a few large items Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionConnecting the appliance to the water supply Permanent ConnectionPermitted water pressure Water inlet 35m long pressure hose is supplied with the applianceFrom your Service Force Centre Water DrainageFor drainage into an outlet Pumping heights of over 1 metre Warranty conditions Great BritainWeitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroCustomer Service Centres Hungary Page Page For general enquiries concerning 0870 5 929Customer Care Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG