Electrolux 1620 If the wash result is not satisfactory, There are grey stains on the washing

Page 31

Problem

Possible cause

Remedy

Water is not entering

Tap turned off.

Turn on the tap.

 

 

the appliance.

The filter in the threaded

Turn off the tap. Unscrew the

ATTENTION ERROR

hose, take out the filter and

inlet hose fitting is blocked.

CODE (E11)/PLEASE

clean it.

 

OPEN THE WATER TAP

Water tap is furred with lime

Check the tap and have it

appears in the display.

scale or is faulty.

repaired, if necessary.

 

The washing has not

Drain hose is kinked.

Remove kink.

 

 

been spun thoroughly

Maximum pumping height of

Please contact your Local

and water remains

1m exceeded.

Service Force.

visible in the drum.

 

Clean the drain pump.

ATTENTION ERROR

 

CODE (E21)/PLEASE

The drain pump is blocked.

Remove foreign bodies from

CHECK THE WATER

 

the pump housing.

DRAINAGE appears in

For sink spigot connections:

Clean the sink spigot.

the display.

The sink spigot is blocked.

 

 

 

 

 

If the wash result is not satisfactory

The washing is grey and there are limescale deposits in the drum

•Too little detergent was used.

•An incorrect detergent was used.

•Individual stains were not pre-treated.

•The programme or temperature was not set properly.

There are grey stains on the washing

•Items that were soiled with ointments, fats or oils were washed using too little detergent.

•The wash temperature used was too low.

•A common cause is that conditioner – in particular the type in con- centrated form - has come in contact with the washing. Wash out such marks as soon as possible and exercise care when using the said conditioner.

Foam can still be seen following the final rinse

•Modern detergents can cause foam to be created even during the fi- nal rinse. In spite of this, the washing has been sufficiently rinsed.

There are white residues on the washing

• What can be seen here are insoluble substances which modern deter- gents contain. They are not the result of insufficient rinsing.

Shake or brush the washing. If possible turn the washing inside out before washing. Check your choice of detergent. Especially with dark

colours it is advisable to use liquid detergents.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Lavamat Lavalogic Dear Customer Following symbols are used in the textContents Child safety device Safety information concerning installationFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyPress the control knob to switch off the appliance Description of the appliance Indicators in the displayControl panel with display Control knob Main control featuresKeys Programme Programme overviewIKN Short Spin Icates, woollens, silk Carrying out a wash programme prior to first use Setting the timeBefore the first wash Preparing and sorting washingRunning a wash cycle Switching on the applianceSetting a programme Changing the temperatureSelecting options Press the Select key Symbol appears in the display Press the Select key. The symbol appears in the displayPress the Options key Current LOAD/DETERGENT display Opening the door/Loading the washingAdding detergent/conditioner If you are using liquid detergentWashing powder/tablets for the main wash cycle Interrupting a programme Starting a programmeProgramme progress Interrupting a programme/Adding washingIf Rinse Hold has been selected Washing cycle complete/Removing the washingSetting extra options Press the Save key Saving a programme settingThen press the Back key 3 times Press the Clear key Clearing a stored programme settingLanguage Removing programme protection Setting programme protectionProgramme protection Start the programmeDeactivating the child safety device Child safety deviceDoor and rubber collar Cleaning and careDetergent drawer Washing drumRemedying small malfunctions yourself What to do ifOnly a few large items There are white residues on the washing If the wash result is not satisfactoryThere are grey stains on the washing Foam can still be seen following the final rinseCarrying out an emergency drain When the water has all drained awayDrain pump Packaging material DisposalOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationRemoving the transit packaging Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the applianceWhere to install If the appliance is to stand on a base Making the appliance levelElectrical Connection Brown Live Wire coloured green and yellowPermanent Connection Connecting the appliance to the water supplyPermitted water pressure 35m long pressure hose is supplied with the appliance Water inletWater Drainage From your Service Force CentreFor drainage into an outlet Pumping heights of over 1 metre Great Britain Warranty conditionsOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandCustomer Service Centres Hungary Page Page Major Appliances 0870 5 929Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents