Electrolux EW 1280F manual

Page 22

The dangers of freezing

If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows:

Remove the plug from the socket.

Close the water tap and unscrew the water inlet hose from the tap.

Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.

Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again.

By doing this, any water remaining in the machine is removed, avoiding the formation of ice and, consequently, breakage of the affected parts.

When you use the machine again, make sure that the ambient temperature is above 0°C.

22

Image 22
Contents Instruction Booklet Contents Child safety General safetyDear customer Tips for environmental protection Technical specificationsDisposal Packaging materialsPositioning InstallationUnpacking Water inletWater drainage Electrical connectionYour new washing machine Use Drain only Options buttonsDisplay Not available for Wool and Hand Wash programmeSTART/PAUSE button Selecting a special programme Skip Reset buttonStart button not pressed Delay Start button Programme phase indicator lightsSorting the laundry TemperaturesLaundry weights Before loading the laundryNot enough washing powder causes Detergents and additivesQuantity of detergent to be used Too much washing powder causesPlace the laundry in the drum Switch the machine onSelect the desired programme/ fabric Measure out the detergentSelect the Spin Speed or the Night Cycle option Select the temperatureSelect the Delay Start Select the desired optionsHow to change a programme during its cycle End of programmeWool Washing ProgrammesHandwash Bleaching Dry cleaningEnergetic wash Delicate wash IroningAfter each wash MaintenanceMaintenance Wash Door sealWater inlet filter Drain pumpEmergency emptying out Page Trouble-Shooting Guide Problem Possible causeNot spun enough Door will not openSpinning starts late or the laundry is No water is visible in the drum0800 10 66 Conditions of the warranty 13 13