Electrolux LAVAMAT 50600 operating instructions After Rinse Hold, After the program is completed

Page 22

Run wash cycle

•SOAKING

3 After soaking separately, the water must be pumped out first and then the main wash cycle can be set as desired:

0Release the SOAKING button, or

rotate the program selector clockwise to PUMP OUT (water is pumped out).

0Subsequently set the main wash cycle as desired.

After Rinse Hold:

After a Rinse Hold the water must be pumped out first or the washing spun:

0Release RINSE HOLD button.

0Rotate the program selector clockwise to SPIN or SHORT SPIN (washing becomes spun according to the program group selected and the final spin speed set),

or

rotate program selector clockwise to PUMP OUT (water is pumped out).

After the program is completed:

0Open the door.

0Remove the washing.

0Push in the program selector.

The indicator ON light is extinguished. Washing machine is off.

0After the program has finished, pull the detergent drawer out a little so that it can dry. Leave the door ajar for a while. This helps to prevent stagnant smells and helps to preserve the door seal.

0Close the water tap.

0We recommend you unplug the appliance and turn off the water supply when the wash program has finished.

22

Image 22

Contents Lavamat Dear customer Contents Contents General safety Safety instructionsInstallation Child Safety During UsePackaging DisposalEnvironmental tips Washing machineMaximum Spin speed 1000 revolutions per minute Important features of your applianceConnection for hot and cold water or only cold water Description of the appliance Front viewProgramme Selector Knob Control panelProgram group COTTONS/LINEN, EASY-CARES +button Program group Delicates Program group WoolEASY-CARES button Program selector as progress indicatorTemperature selector Soaking buttonDetergent Drawer Before using your machine for the first time Selector Washing Litre KWhPreparing the washing cycle Sorting out and preparing washingTypes of washing and care symbols How much washing powder and fabric softener? Using a water softening agentLiquid detergent Brief instructions When the washing cycle has finishedRun wash cycle Loading the washingAdd detergent/conditioner Set the washing program Set the temperatureSelecting the washing program For easy-cares washingTo interrupt the washing program prematurely During the washing programEnd of wash cycle/removing the washing After PRE WASH/SOAKINGAfter Rinse Hold After the program is completedProgram tables WashingSeparate rinsing Separate spinningSeparate prewash Separate soakingDaily use Maintenance and CleaningDetergent compartment Washing machine drum Precautionary measures in the event of a risk of frostDoor Troubleshooting Certain problems etcTroubleshooting If after the final rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingWhen the water has drained out completely Carrying out an emergency emptyingCleaning the drain pump Information for the electrician Technical dataPower supply This appliance complies with the following EC directives0870 5 929 Service & Spare PartsService & Spare Parts Help us to help youIndex Automatic load adaptation