Troubleshooting
Carrying out an emergency emptying
1 Warning! Isolate the washing machine from the mains supply before the emergency emptying!
If the washing machine no longer pumps out the water an emergency emptying must be carried out.
Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before emergency emptying!
0Put down a flat container to catch the water draining out.
0Pull down the flap in the left corner of the base strip and remove it.
0 Release the emergency emptying hose from its holder.
0 Pull the emergency emptying hose out a little.
0Place a container underneath to catch the water.
0 Release the plug of the emergency emptying hose by turning it anti- clockwise and pull it out.
The water will drain out. Depending on the amount of water, it may be necessary to empty the container catching the water several times.
To do this, temporarily close the
emergency emptying hose again with the plug.
When the water has drained out completely:
0Push and twist the plug firmly back into the emergency emptying hose.
0Push the emergency emptying hose back in a little and let it catch on to the holder.
0Replace the flap in the base plate and close it.
3 When the washing machine is completely empty, the ÖKO lock can no longer function correctly. Therefore before the next wash pour in approx 1 litre of water (pour it in through the washing powder compartment).
31