Electrolux LAVAMAT 62800 manual Setting the delay timer, Starting a programme, Programme progress

Setting the delay timer

3With the DELAY TIMER button you can postpone the start of a pro- gramme by 30 minutes (30') to a maximum of 23 hours (23h).

1.Select programme.

2.Continue pressing the DELAY TIMER button until the desired start delay is displayed in the multi-display, for example12h, if the start of the programme is to be delayed by 12 hours. DELAY TIMER light is lit.

3If the display is showing 23h and you press the button again, the time delay will be cancelled. 0' appears followed by the duration of the set wash programme.

3.To activate the time delay, press the START/PAUSE button. The remain-

ing time till the programme start is being shown (e. g. 12h, 11h, 10h, ...

30' etc.).

Starting a programme

1.Check that the tap is turned on.

2.Press the START/PAUSE button. The programme is started or starts after the time delay set has elapsed.

3If after the START/PAUSE button has been pressed E40 flashes in the multi-display, the END indicator flashes 4 times and at the same time an acoustic signal sounds 4 times, the door is not closed properly. Push the door firmly closed and press the START/PAUSE button again.

Programme progress

•The programme progress display shows the programme step that is currently being performed.

•The multi-display indicates the estimated time remaining (in minutes) until the end of the programme.

3During the washing cycle the remaining time may be increased or stay the same for a while as the programme adjusts itself to different condi- tions (e. g. type and quantity of laundry, out of balance spin detection, special rinses, etc.).

15