Electrolux 14 manual LEN, Rincage

Page 34

Instructions for use

Fault

Possible Cause

Remedy

 

The water inlet hose coupling

Tighten the hose coupling.

 

is loose.

 

 

The outlet hose is loose.

Check the outlet hose and

 

replace if necessary.

 

 

 

The detergent solution pump

Close the cover properly.

 

cover is not properly closed.

 

Water runs out from

Clothes are caught in the

Stop the programme, remove

under the machine.

the item from the door.

door.

 

Start the programme again.

 

 

 

 

Fasten the emergency drain

 

The emergency drain hose is

hose correctly (see “Carrying

 

out an emergency drain op-

 

not properly fastened or is

 

eration”). If the emergency

 

loose.

 

drain hose is loose, contact

 

 

 

 

Customer Service.

 

 

 

Fabric softener is not

The fabric softener tray in

Clean the detergent dis-

drawn in, the condi-

the conditioner compart-

penser drawer, set the fabric

tioner æcompartment

ment is not correctly posi-

softener tray firmly in posi-

is full of water.

tioned, or is clogged.

tion.

 

 

Note the maximum wash

 

 

load (see Programme tables).

Clothes are severely

Too much washing has

For easy-care textiles, select

crumpled.

probably been loaded.

the EASY IRON (STRIJKVRIJ,

 

 

SANS REPASSAGE) pro-

 

 

gramme.

 

There is a kink in the outlet

Straighten the hose.

 

hose.

 

 

Washing is not spun

The maximum pump height

Call Customer Service, who

sufficiently, excess wa-

(outlet hose height 1m from

have modification kits avail-

ter is still visible in the

from the support surface of

drum.

able as accessories for pump

the appliance) has been

Error code E20 ap-

heights over 1m.

exceeded.

pears. The RINSE (SPOE-

 

The detergent solution pump

Switch off the appliance and

LEN, RINCAGE)

is clogged.

pull out the mains plug.

indicator flashes.

 

 

 

At the syphon coupling:

Clean the syphon.

 

The syphon is clogged.

 

 

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Lavamat Souplesse Dear customer Contents Remedying Faults What to do ifPage Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General SafetyFor polyoxymethylene, e.g. plastic clips DisposalDispose the packing material Dispose the old applianceEnvironment Tips Front view DescriptionDispenser drawer for Detergent and Conditioner Programme selector Control panelMain wash for cottons/linen at 30 C to 95 C Main wash for delicates, at 30 C or 40 C Wool WOL, LAINE/P HandwashAdditional Programming Buttons Shortened main wash cycle for washing that is lightly soiledConsumption Values Filling Quantity Water EnergyBefore the First Wash Pull out the washing powder drawer slightlyPrepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes How much washing detergent and care agent? Water SoftenerQuick Start Guide When the programme is finishedPerforming a wash cycle Add the WashingTioners If using liquid detergents/detergent tabletsPouring in the conditioner/detergent Important! Do not fill past the MAXSet the Washing Program Per minute Change Spin Speed / Select Rinse HoldRevolutions Programme display Progress indicatorStarting the programme MultidisplaySelecting additional programme functions Changing the programmeChanging or interrupting Changing the spin speedEnd of wash cycle/Taking out washing Programme charts WashPRE Wash Voorwas Separate rinse Separate Conditioning/ Starching/ImpregnatingSeparate spin Cleaning and Care Washing Detergent DrawerWashing Drum Cleaning the drain pumpFilling Door Before cleaning the drain pump Remedying Faults What to do ifTrifug LEN, Rincage Finished, and the END If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Setting the Child Safety Feature Child Safety FeatureWhen all the washing solution has drained off Cancelling the Child Safety FeatureDimensions Technical DataMeasurements in mm Tips on safety when installing Transporting the Unit Setting up the applianceRemove the Transport Safeguard Firmly pull both hose holders off UnitSupplied with the unit Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Delivery Heads over 1m Kitchen with worktops 85 cm high Fitting under kitchen worktopsNiche size requirements Kitchens with worktops 90 cm or higher Guarantee conditions BelgiumGuarantee conditions Customer services Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents