Electrolux 14 manual Compensate for Floor Unevenness

Page 44

Setting up and connection instructions

Compensate for Floor Unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the

threaded foot as far as it will go.

2.Adjust the screw feet so that the

unit is horizontal and stable. The unit must not wobble over when loaded.

3. If necessary, check the setting with a spirit level.

Attention! Never compensate for minor floor unevenness with un- derlays made of wood, card etc.

Always adjust the adjustable feet.

44

Image 44

Contents Lavamat Souplesse Dear customer Contents Remedying Faults What to do ifPage Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General SafetyDisposal Dispose the packing materialFor polyoxymethylene, e.g. plastic clips Dispose the old applianceEnvironment Tips Dispenser drawer for Detergent and Conditioner DescriptionFront view Main wash for cottons/linen at 30 C to 95 C Control panelProgramme selector Main wash for delicates, at 30 C or 40 C Wool WOL, LAINE/P HandwashAdditional Programming Buttons Shortened main wash cycle for washing that is lightly soiledConsumption Values Filling Quantity Water EnergyBefore the First Wash Pull out the washing powder drawer slightlyPrepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes How much washing detergent and care agent? Water SoftenerWhen the programme is finished Performing a wash cycleQuick Start Guide Add the WashingIf using liquid detergents/detergent tablets Pouring in the conditioner/detergentTioners Important! Do not fill past the MAXSet the Washing Program Revolutions Change Spin Speed / Select Rinse HoldPer minute Progress indicator Starting the programmeProgramme display MultidisplayChanging the programme Changing or interruptingSelecting additional programme functions Changing the spin speedEnd of wash cycle/Taking out washing Programme charts WashPRE Wash Voorwas Separate spin Separate Conditioning/ Starching/ImpregnatingSeparate rinse Cleaning and Care Washing Detergent DrawerFilling Door Cleaning the drain pumpWashing Drum Before cleaning the drain pump Remedying Faults What to do ifTrifug LEN, Rincage Finished, and the END If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Child Safety Feature When all the washing solution has drained offSetting the Child Safety Feature Cancelling the Child Safety FeatureMeasurements in mm Technical DataDimensions Tips on safety when installing Setting up the appliance Remove the Transport SafeguardTransporting the Unit Firmly pull both hose holders off UnitSupplied with the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Niche size requirements Fitting under kitchen worktopsKitchen with worktops 85 cm high Kitchens with worktops 90 cm or higher Guarantee conditions BelgiumGuarantee conditions Customer services Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG