Electrolux 14 manual Water Inflow

Page 46

Setting up and connection instructions

Water Inflow

A pressure hose 1.5m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible.

–Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control.

–Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with Aqua-Control.

Attention! Never cut into pieces in order to extend the hoses!

3	Sealing rings are supplied either in the plastic
	nuts of the hose screw connection or in the en-

closed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Attention!

– Do not lay the supply hose vertically downwards. Rather, turn it to the right or left as shown in the diagram.

– Only tighten the screw connection manually.

2. Connect the hose with the

straight connection to a water tap with a screw thread of R 3/4 (inches).

Attention! Only tighten the screw connection manually.

3. By slowly opening the water tap before putting the washing machine into operation, check whether the connection is free of leaks.

46

Image 46

Contents Lavamat Souplesse Dear customer Contents Remedying Faults What to do ifPage Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General SafetyFor polyoxymethylene, e.g. plastic clips DisposalDispose the packing material Dispose the old applianceEnvironment Tips Front view DescriptionDispenser drawer for Detergent and Conditioner Programme selector Control panelMain wash for cottons/linen at 30 C to 95 C Main wash for delicates, at 30 C or 40 C Wool WOL, LAINE/P HandwashAdditional Programming Buttons Shortened main wash cycle for washing that is lightly soiledConsumption Values Filling Quantity Water EnergyBefore the First Wash Pull out the washing powder drawer slightlyPrepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes How much washing detergent and care agent? Water SoftenerQuick Start Guide When the programme is finishedPerforming a wash cycle Add the WashingTioners If using liquid detergents/detergent tabletsPouring in the conditioner/detergent Important! Do not fill past the MAXSet the Washing Program Per minute Change Spin Speed / Select Rinse HoldRevolutions Programme display Progress indicatorStarting the programme MultidisplaySelecting additional programme functions Changing the programmeChanging or interrupting Changing the spin speedEnd of wash cycle/Taking out washing Programme charts WashPRE Wash Voorwas Separate rinse Separate Conditioning/ Starching/ImpregnatingSeparate spin Cleaning and Care Washing Detergent DrawerWashing Drum Cleaning the drain pumpFilling Door Before cleaning the drain pump Remedying Faults What to do ifTrifug LEN, Rincage Finished, and the END If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Setting the Child Safety Feature Child Safety FeatureWhen all the washing solution has drained off Cancelling the Child Safety FeatureDimensions Technical DataMeasurements in mm Tips on safety when installing Transporting the Unit Setting up the applianceRemove the Transport Safeguard Firmly pull both hose holders off UnitSupplied with the unit Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Delivery Heads over 1m Kitchen with worktops 85 cm high Fitting under kitchen worktopsNiche size requirements Kitchens with worktops 90 cm or higher Guarantee conditions BelgiumGuarantee conditions Customer services Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG