Electrolux 14 manual If the washing result is not satisfactory

Page 36

Instructions for use

	Fault	Possible Cause	Remedy
	When one of the addi-
	tional programme	The additional programme
	function buttons is	function selected cannot	Select another function.
	pressed, the corre-	be combined with the	Select another function.
	pressed, the corre-	be combined with the
	sponding indicator	programme already set.
	light does not come on.

If the washing result is not satisfactory

If the washing is grey and limescale forms in the drum

•Not enough washing detergent added.

•The right washing detergent was not used.

•Special types of stain were not pretreated.

•Program or temperature incorrectly set.

•If binary wahing detergents were used, the individual components were not added in the correct ratio.

If there are still grey stains on the washing

•Washing contaminated with creams, grease or oils was washing with too little detergent.

•Washing at too low temperature.

•A frequent cause is that conditioner – particularly concentrated form, ended up on the washing. Wash out such stains as quickly as possible and carefully use the right conditioner.

If foam is still visible after the final rinse

•Modern washing detergents can still produce foam, even in the final rinse. The washing is still sufficiently rinsed.

If there are white residues on the washing

•These are the insoluble components of modern detergents. They are not the result of an insufficient rinsing effect.

Shake or brush off the washing. Perhaps in future you should turn the washing before washing it. Check the choice of detergent and use a liquid detergent if necessary.

36

Image 36

Contents Lavamat Souplesse Dear customer Contents Remedying Faults What to do ifPage Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Dispose the packing materialFor polyoxymethylene, e.g. plastic clips Dispose the old applianceEnvironment Tips Description Front viewDispenser drawer for Detergent and Conditioner Control panel Programme selectorMain wash for cottons/linen at 30 C to 95 C Main wash for delicates, at 30 C or 40 C Wool WOL, LAINE/P HandwashAdditional Programming Buttons Shortened main wash cycle for washing that is lightly soiledConsumption Values Filling Quantity Water EnergyBefore the First Wash Pull out the washing powder drawer slightlyPrepare the Washing Cycle Sort and Prepare the WashingWashing Types and Care Codes How much washing detergent and care agent? Water SoftenerWhen the programme is finished Performing a wash cycleQuick Start Guide Add the WashingIf using liquid detergents/detergent tablets Pouring in the conditioner/detergentTioners Important! Do not fill past the MAXSet the Washing Program Change Spin Speed / Select Rinse Hold Per minuteRevolutions Progress indicator Starting the programmeProgramme display MultidisplayChanging the programme Changing or interruptingSelecting additional programme functions Changing the spin speedEnd of wash cycle/Taking out washing Programme charts WashPRE Wash Voorwas Separate Conditioning/ Starching/Impregnating Separate rinseSeparate spin Cleaning and Care Washing Detergent DrawerCleaning the drain pump Washing DrumFilling Door Before cleaning the drain pump Remedying Faults What to do ifTrifug LEN, Rincage Finished, and the END If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Child Safety Feature When all the washing solution has drained offSetting the Child Safety Feature Cancelling the Child Safety FeatureTechnical Data DimensionsMeasurements in mm Tips on safety when installing Setting up the appliance Remove the Transport SafeguardTransporting the Unit Firmly pull both hose holders off UnitSupplied with the unit Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Delivery Heads over 1m Fitting under kitchen worktops Kitchen with worktops 85 cm highNiche size requirements Kitchens with worktops 90 cm or higher Guarantee conditions BelgiumGuarantee conditions Customer services Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG