Electrolux 10500 VI manual Programme progress display, Display shows the following information

Page 15

WASH

RINSES RINSE HOLD DRAIN

SPIN

CLEAN

FILTER

END

PREWASH

Description of the appliance

Display

The display shows the following information:

•If the programme selector dial is on the RESET position, three flashing dashes appear immediately after pressing the ON/OFF button to indicate that the machine is ready to be selected for the required wash programme.

•Duration of the selected wash programme, calculated automatically on the basis of the maximum recommended load for each type of fab- ric.

•When the programme has finished, a flashing zero is displayed.

•Delayed start, programmed using the special button.

The selected delay is shown in the display and is updated every hour.

•Incorrect option selection. If an option which is not compatible with the set wash programme is selected, the message Err is displayed.

•Alarm code indicating a fault in the machine operation (see pages 31...34).

Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.

After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.

If the CLEAN FILTER light flashes at the end of the pro- gramme this means that the drain filter is clogged.

The END pilot light flashes in the event of operating prob-

lems. At the same time one of the following lights starts to flash: RINSE HOLD = the machine does not fill

RINSES	= the machine does not empty
WASH	= the door has not been closed

To eliminate the problem, see the “Something not working” section.

15

Image 15

Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents Safety instructions General safetyInstallation During use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washing machine Front view Description of the applianceControl panel Programme selector dialAccording to the type of laundry START/PAUSE button Delay Start buttonON/OFF button Mains-on lightThis function cannot be used with Quick Wash and Prewash Programme Option buttonsQuick Wash Display Programme progress displayDisplay shows the following information Opening the door after the programme has started Cancelling/Altering a programmeProgramme chart Detergent dispenser drawerBefore the first wash Sorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels CottonSynthetics Easy-cares Delicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the desired wash programme Selection of the Delay Start optionIf the delay start option has been selected, Starting the programmeAt the end of the programme Wash programmes Programme chartWool Special programmesAfter each wash Cleaning and maintenanceMaintenance Wash Periodical cleaning ExteriorPull out the filter Door sealDrain filter Water inlet filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseTechnical data Water pressure 50-800 kPaThis appliance complies with the following EC directives Help us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionDimensions of the appliance Front view and side viewRear view Previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagPositioning LevellingSet the machine Water inlet cold water connection only Water drainageDo not connect to a hot water supply Covered with water Interest of the environmentUpright standpipe should have a mini Elbow to the top of the pipe see diaBrown Live Electrical connectionsAccordance with the following code Green and Yellow Earth BluePermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorSee Fig. H With the appliance Installed adjust all fourDue to the additional 40 mm height required, ensure Drill four fixing holes see Position the base into