Electrolux 10500 VI manual Interest of the environment, Upright standpipe should have a mini

Page 46

Installation

The upright standpipe should have a mini-
mum length of 30 cm (12”) from the bottom
of the elbow to the top of the pipe (see dia-	cm.(12")30
way that the end of the drain hose cannot be	cm.(12")30
gram). Make sure that it is designed in such a
covered with water.	Min.
If you intend the drain hose from the machine
to empty into a sink, make sure that the sink
is empty and the plug hole is not blocked. Use
the plastic “U -Piece” supplied.

Important

38mm.(1/2") diameter standpipe

Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

In the interest of the environment

Washing machines and dish- washers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treat- ment before being discharged safely into a river.

It is essential that these appli- ances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local water authority.

SHOWER

SINK TOILET

BATHBIDET

WASHING

MACHINE DISHWASHER

RAINWATER

'RUN-OFF'

		FOUL DRAIN
	SURFACE WATER	FOUL SEWERS
	SURFACE WATER
	DRAINS & SEWERS	SEWAGE
		SEWAGE
	UNTREATED	TREATMENT
	UNTREATED	WORKS
	DISCHARGE	WORKS
	DISCHARGE	TREATED
		TREATED
		DISCHARGE
	RIVER	RIVER

46

Image 46

Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents General safety Safety instructionsInstallation Child safety During usePackaging materials DisposalTips for environmental protection MachineMain features of your washing machine Description of the appliance Front viewProgramme selector dial Control panelAccording to the type of laundry Mains-on light Delay Start buttonON/OFF button START/PAUSE buttonProgramme Option buttons This function cannot be used with Quick Wash and PrewashQuick Wash Programme progress display DisplayDisplay shows the following information Cancelling/Altering a programme Opening the door after the programme has startedDetergent dispenser drawer Programme chartBefore the first wash Preparing the wash cycle Sorting out and preparing the laundryCotton Types of fabric and care labelsSynthetics Easy-cares Delicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersLoad the laundry How to washSwitching the machine on Add detergent and additiveSelection of the Delay Start option Selection of the desired wash programmeStarting the programme If the delay start option has been selected,At the end of the programme Programme chart Wash programmesSpecial programmes WoolPeriodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each washWater inlet filter Door sealDrain filter Pull out the filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryWater pressure 50-800 kPa Technical dataThis appliance complies with the following EC directives 08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions European Guarantee Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Dimensions of the applianceRear view Carefully slide out the right poly- thene bag InstallationUnpacking Previously removed screwLevelling PositioningSet the machine Water drainage Water inlet cold water connection onlyDo not connect to a hot water supply Elbow to the top of the pipe see dia Interest of the environmentUpright standpipe should have a mini Covered with waterGreen and Yellow Earth Blue Electrical connectionsAccordance with the following code Brown LivePermanent connection Door Preparation and assembly of the doorBuilding-in HingesMounting the door Counter-magnetDrill four fixing holes see Position the base into Installed adjust all fourDue to the additional 40 mm height required, ensure See Fig. H With the appliance